Acerca de este artículo

Etiquetado rápido: nuestra máquina etiquetadora garantiza una aplicación de etiquetas rápida y sin complicaciones. Con su sencillo funcionamiento elimina errores y reduce drásticamente el tiempo de etiquetado. ¡Imagínese etiquetar entre 15 y 20 botellas en tan solo un minuto! Aumente su productividad y reduzca los costos de producción sin esfuerzo.

Diga adiós a las burbujas: nuestro aplicador de etiquetas viene con una ingeniosa barra redonda para presionar botellas y un rodillo de goma para garantizar que las etiquetas se adhieran suavemente y sin molestas burbujas. Sus productos lucirán elegantes, sofisticados e impecables.

Ajuste universal: la máquina etiquetadora de botellas es increíblemente versátil. Puede ajustarlo fácilmente para que quepa en botellas redondas de 20 a 120 mm/0,78 a 4,72 pulgadas. Además, puede manejar rollos de papel de etiquetas tanto transparentes como adhesivos, con anchos de 0,39 a 5,12 pulgadas/10 a 130 mm y largos de 0,39 a 11,81 pulgadas/10 a 300 mm.

Material de acero inoxidable: Fabricada con acero inoxidable A3 y 201, nuestra máquina etiquetadora manual está diseñada para resistir la prueba del tiempo. Su eje de rodillo está hecho de acero inoxidable 201 y PC, lo que garantiza que sea resistente al óxido y duradero, lo que promete la longevidad de su inversión.

Más de lo que parece: actualizado con un sistema de ajuste manual fácil de usar para cambios de etiquetas, este aplicador de etiquetado es más eficiente y conveniente que nunca. La manivela ergonómica facilita el funcionamiento y el rodillo de goma garantiza una aplicación suave de las etiquetas.

Especificación

Número de modelo del artículo: MT-30

Eléctrico o no: no eléctrico

Peso del producto: 14,4 libras/6,53 kg

Tipos de etiquetas: Etiqueta transparente, Etiqueta adhesiva

Tipo de ajuste: Tornillo

Material principal: A3+201

Material del rodillo: SUS201+PC

Material del disco de etiqueta: POM

Material de la barra de prensa: recubierto A3 + PC (rodillo)

Tamaño del producto: 18,58 x 8,98 x 10,24 pulgadas/472 x 228 x 260 mm

Ancho de la etiqueta: 0,39-5,12 pulg./10-130 mm

Longitud de la etiqueta: 0,39-11,81 pulgadas/10-300 mm

Diámetro interior del rollo de etiquetas: ≥0,98 pulg./≥25 mm

Diámetro exterior del rollo de etiquetas: <7,09 pulg./<180 mm

The label machine is well made and designed. However, there are no assembly instructions and very limited troubleshooting instructions. The rewind shaft should also have shaft collars so the waste paper helps keep the labels aligned. I bought some two-piece shaft collars and installed them. It works well to keep it all aligned. Aligning and keeping the labels straight is the biggest challenge. I went through about 18 bottles to get it all right. Someone with excellent English skills should write some assembly and operating instructions with photos.

when we first got this manual labeller and put it together I was disappointed with the number of different allen key sizes need to assemble it. The biggest job is to actually align the labels to wrap bottles correctly and there is no manual to show how to do this but to figure it out alone. I initially wanted to throw this piece of equipment in the trash or return it but then decided to relax and persevere and after some time, got it working really well. To the point that I didn't want to change out the label size so bought another one :) The different sized allen keys r a nuisance for sure - having a universal key size saves time and patience. Also, having a proper English manual would be great. I have since talked with a number of other packing companies in my area and they have all complained about this - to the point that they have purchased the Label Wizards. Hope this helps. I managed to persevere and now feel comfortable having one (1) machine for each label we use so as not to have down time.

Ver más Ver menos

After a few minutes of setup, I was labeling my jars without a hitch. The included instructions left a bit to be desired, but it was easy enough to figure out the assembly, alignment, and positioning. The machine is well-built and very solid.I was concerned that the weight of a 32-ounce HDPE wide-mouth jar wouldn't be sufficient for the label to adhere properly, but with proper roller setup to position it correctly, it's just fine.

The unit requires minor assembly but does come with all the tools needed. It doesn't however, come with any instructions which would make it easier to assemble and get started. Getting the labels to go on straight takes some adjusting of the roll position and label guides but with some playing around you can get the labels on straight. It could also use guides for the take up shaft which would help maintain straightness.Overall it works and for the price is a good deal.

Opiniones de los Clientes

4.4 Fuera de5

Basado en 19 reseñas

Calificaciones por características

Precio 4.8
Calidad 4.7
Características 4.7
Uso sencillo 4.7
Ver más Ver menos

19 Reseña(s)

Filtros claros

Ramona larrarte

Arquitecta

Muy eficiente, llego antes de la fecha , muy buenas condiciones , muy buen material , muy buen precio

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

Mike

Owner

Simple, easy, and to the point. Would recommend for someone starting out and wanting to label your own products.

Ciera

Owners

Great order and fulfilled quickly. Would order again and refer others. Came as expected , everything worked perfectly.

Ruger

Sir

Útil Enviando comentarios... Gracias por tus comentarios. 1 personas encontraron esto útil

Gregory

CEO

Útil Enviando comentarios... Gracias por tus comentarios. 2 personas encontraron esto útil

linda fellows

Great for certain uses

It wouldn’t label a lite product

Ray Barkalow

Why Didn't I Buy This Sooner?

N Peterson

Works well for the price

Hamil P.

Well built

Excellent build quality, took 15-20min to assemble the product, instructions are clear enough to easily assemble without hitches. Overall a very good product for the price.

Svz

Works great after adjustments made

Happy with purchase so far. Takes a little time to get the settings just right, and it needs occasional adjusting while in use. Be prepared to lose some labels while making adjustments and figuring or what works for your labels and product. Allowed me to label 50 jars in 14 minutes with first real trial after adjusting, so very happy with that. Only thing I didn’t care for were the very short, 1 page build and trouble shoot instructions, but being a simple machine, it was easy to figure out. No way to mark your settings when going from one size label or jar to another though, so plan ahead for that! Will likely buy another very soon! Great in between step from hand labeling to big automation machine, great for someone doing business from home. Not heavy, easy to move too.

VEVOR Máquina etiquetadora redonda manual, 15-20 piezas/min, aplicador de etiquetas de botellas para botellas redondas, etiquetadora de botellas redondas manual ajustable adecuada para diámetro de botella de 0,78 a 4,72 pulgadas (con barra de presión)

Acerca de este artículo

Frecuentemente Compramos Juntos

Quien compró este articulo también compró

Especificación

Opiniones de los Clientes

Calificaciones por características

Quien vio este articulo también también vio