Chain Sling
Results for Chain Sling
A chain sling is a set of alloy steel chain legs joined at a top ring, with a hook on each leg end, that links a load to a hoist, crane or engine lift. It usually comes with two or four legs, grab hooks with safety latches and, on many sets, shortening adjusters. The rigger hangs the ring on the hoist hook, attaches each leg to a lift point, sets the leg lengths and then raises the load slowly. These slings are designed for garages, workshops and job sites.
Most of the 17 products here are G80 chain slings. 5 ft four-leg slings suit engine pulls on a shop crane, while 10 ft four-leg slings reach farther apart lift points. 3/8 in heavy-duty slings carry the highest listed ratings for larger machines, and 1/4 in light slings keep the weight down for small jobs. Two-leg slings handle narrow loads with two pick points. Chain drum lifters grip the rim of a drum, and polyester bridle slings offer a softer contact surface. Every chain sling rating on this page is a single figure without angle ratings, so riggers check the sling tag and lift plan before use. Buyers usually match the rated load first, then check the chain size, leg reach and how many lift points the load has.
Five things decide which one fits:
- Rated load: the working load listed for the whole sling.
- Chain size: the chain diameter in each leg.
- Leg length: how far each leg reaches from the top ring.
- Shortening adjusters: how many legs can be shortened to level a load.
- Sling weight: what you carry and hang on the hook.
Browse every chain sling here, and see the wider engine hoist range.
Chain Sling and Lifting Sling Types at a Glance
The slings on this page differ in how many legs they have, how the legs adjust and what touches the load, as set out below.
| Type | Leg Setup | Length Control | Load Contact |
|---|---|---|---|
| Four-leg chain sling with adjusters | 4 G80 chain legs on one top ring | 4 adjusters shorten each leg | Grab hooks with spring latches |
| Four-leg chain sling, fixed length | 4 G80 chain legs of 10 ft | No built-in adjusters | Grab hooks with spring latches |
| Two-leg chain sling | 2 G80 chain legs of 6 ft | 2 shortening clutches | Grab hooks on two pick points |
| Chain drum lifter | 2 short chains of 1.6 ft | Fixed length | Latched hooks that grip the drum rim |
| Polyester bridle sling | 4 webbing legs of 5 ft, 1 in wide | Fixed length | Soft polyester webbing with latched hooks |
VEVOR Alloy Steel Chain Slings for Heavy Lifting
Alloy steel chain slings are equipment made up of chains that have been heat-treated and fitted with forged fittings. They are used where the lifting operation is rugged, and the material is heavy. They offer a lot more resistance to wear, shocks, and heat than fabric slings. VEVOR alloy steel chain slings are meant for heavy-duty lifting.
VEVOR alloy steel chain slings are great for industrial and mechanical applications to provide efficient and stable lifting solutions. These slings are composed of high-strength Grade 80 alloy steel chains combined with heavy-duty hooks to perform heavy-duty lifting.
The range includes various chain lifting slings, such as single-leg and double-leg chain slings. The chain diameters offered are 1/4 inch, 5/16 inch, and 3/8 inch, and the length varies from 5 ft to 10 ft. The lifting capacity ranges from 2000 lbs drum lifters to heavy-duty slings above 20000 lbs.
Types of Alloy Steel Chain Slings and Lifting Applications
Chain slings are designed to meet conditions in which fabric or wire rope slings can't handle - heavy loads, sharp edges, repeated industrial use, and high heat.
Light-Duty Slings for Repair Shops and Small Workshops
The 1/4 inch chain lifting slings are a suitable and convenient solution for lighter loads, quick rigging jobs, and maintenance lifting situations. The sling 1/4x5ft chain lifting sling with hooks is ideal for repair shops and light industrial applications, and can carry loads of approximately 6600lbs.
Mid-Range Slings for Engine and Frame Lifting
The 5/16" chain slings offer a good combination of weight and lifting capacity, with a load capacity of around 11,000 lbs, depending on the configuration used. Models are available in 5/16 x 5 ft and 5/16 x 10 ft, which are typically used for lifting engines, steel frames, and construction materials that require a longer reach or a higher capacity.
Heavy-Duty Slings for Industrial and Fabrication Work
Once lifting loads shift into the more substantial end, the 3/8 inch chain slings are introduced, with a lifting capacity of up to 22,900 lbs. The 3/8 inch x 10 ft heavy-duty alloy steel chain sling is designed for steel structure lifting, heavy machine, and large-scale fabrication projects.
Double Leg Chain Slings for Balanced and Wide Loads
Two-point attachment is useful for wide loads, irregular or erratic loads, and loads that move during lift. The reliable 5/16" x 10 ft double-leg chain sling with grab hooks provides safety in these applications, and the two-leg sling with reinforced fittings provides additional security when lifting in difficult conditions.
Drum Lifters for Vertical Cylinder Handling
For cylindrical load items such as drums and barrels, standard chain slings are not necessarily practical. Specialized drum lifters are made to securely and carefully lift drums vertically. The G80 chain drum lifter is designed to lift drums vertically at a safe rate, and is available in both thickened security hook and security hook with chain options, with rated capacities of 2,000 lbs and 2,200 lbs, respectively.
Multi-Hook and Grab Hook Configurations for Flexible Rigging
Other lifts involve using adjustable chain lengths and/or multiple attachment points, which traditional hook arrangements cannot accommodate. Riggers can use grab hook chain slings to reduce the working length of the chain without the use of tools to achieve greater control over load positioning.
Which Sling Fits Your Lift
Confirm the load weight, the number of lift points and the sling angle in your lift plan, then read across to one product.
| Confirm Before Purchase | Matching Specification | Recommended Product | Main Limitation |
|---|---|---|---|
| Your engine has 4 lift points close to the hoist | 4 legs of 5 ft, 4 adjusters, 11,000 lb rated | 5 ft four-leg sling | Rating not given by sling angle |
| Your lift plan calls for 10 mm chain on 4 legs | 10 ft legs, 4 adjustable hooks, 22,900 lb rated | 10 mm x 10 ft sling | 80.25 lb to carry, no angle ratings |
| Your load has only 2 pick points | 2 legs of 6 ft, 2 shortening clutches, 11,000 lb rated | 10 mm two-leg sling | No angle ratings listed, 24.03 lb to carry |
| You move drums upright from the rim | 2 chains of 1.6 ft, 2,000 lb rated | chain drum lifter | Drum diameter range not specified on the product page |
| The load surface marks easily | 1 in polyester webbing, 6,600 lb at a 60 degree angle | polyester bridle sling | Edge protection needed on sharp corners |
Care and Maintenance of Alloy Steel Chain Slings
A chain is only as secure as the condition it's in. Periodic inspections and correct maintenance will greatly prolong the useful life of the equipment, and most importantly, make the lifting at the site safer for all concerned.
Inspect Every Sling Before Each Use
Inspect all links, hooks, and master links for cracks, deformations, corrosion, or wear before using a chain sling to attach to a load. The sling may also be overloaded or damaged if the shape of the links or surface has changed, even if it is a minor change.
Check for Stretch and Link Wear Regularly
Repeated application and over time, chain links can stretch slightly under load stress. Check the length of the chain occasionally against the specified length - if it has grown longer, then it has worn and has a lower capacity.
Clean Chains After Use in Harsh Environments
Dirt, grit, chemicals, or moisture cause chain links and fittings to wear more quickly. Once the chain is used in harsh conditions, clean the surface with a clean cloth and loosen the debris between the links. If the chain comes in contact with corrosive material, rinse it in plenty of water and dry it completely.
Lubricate Chains to Reduce Wear Between Links
Standard lubrication minimises metal-on-metal wear and ensures links move freely at the contact points. Feed a light machine oil or chain lube through the linkages of the chain, all the way around the length of the chain.
Store Chain Slings Properly When Not in Use
Not only do chains that are left coiling on the floor deteriorate more quickly, but they also fail more easily when exposed to outdoor elements. Store chain slings in a dry, covered storage area in designated hangers or racks. Always avoid acids, chemicals, and extreme heat sources.
Best-Seller Comparison
The five best sellers are four chain slings and a drum lifter, compared below on rated load, chain size, leg length, shortening adjusters and sling weight.
| Product | Rated Load | Chain Size | Leg Length | Shortening Adjusters | Sling Weight |
|---|---|---|---|---|---|
| 8 mm x 5 ft Four-Leg Chain Sling | 11,000 lb working load, no angle ratings listed | 8 mm G80 manganese steel chain, the mid size | 5 ft per leg, the shortest of the chain slings | 4 adjusters, one on each leg for leveling | 28.7 lb, the lightest chain sling of the five |
| 10 mm x 10 ft Four-Leg Chain Sling, 22,900 lb | 22,900 lb working load, the highest of the five | 10 mm G80 alloy steel chain, the thickest here | 10 ft per leg for wide lift points | 4 adjustable hooks for setting leg length | 80.25 lb, the heaviest of the five |
| 8 mm x 10 ft Four-Leg Chain Sling | 11,000 lb working load, same as row 1 | 8 mm G80 manganese steel chain, the mid size | 10 ft per leg, twice the reach of row 1 | None built in, legs stay at full length | 45.42 lb, mid weight for a 10 ft set |
| 10 mm x 10 ft Four-Leg Chain Sling, 18,400 lb | 18,400 lb working load, no angle ratings listed | 10 mm G80 manganese steel chain, matching row 2 | 10 ft per leg, same reach as row 2 | 4 adjusters, one on each leg for leveling | 77.6 lb, close to row 2 |
| 1.6 ft G80 Chain Drum Lifter | 2,000 lb working load, 15,400 lb single-chain break | 6 mm G80 chain, the thinnest of the five | 1.6 ft per chain, the shortest here | None, the hooks clip straight onto the drum rim | 6.17 lb, the lightest of the five |
Reliable Chain Lifting Slings for Workshop and Site Use
VEVOR has a large selection of alloy steel chain slings at a very reasonable price range and various specifications and sizes. Among the alloy steel chain slings offered by VEVOR are the chain lifting slings and double leg chain slings, which can be used for light, medium, and heavy-duty lifting tasks. The alloy steel chain slings consist of sturdy materials and are of reliable strength ratings which provide a lifting solution that is both durable and stable.
Frequently Asked Questions
How do I choose the right chain sling for my lifting needs?
Start with the load weight and number of lift points, then pick a sling whose rated load covers the load at the angle you will rig. Check chain size and leg reach next. The 5 ft four-leg sling lists 11,000 lb with 4 adjusters.
What safety precautions should I follow when using chain slings?
Inspect every link and hook before use, never exceed the tag rating, keep legs untwisted and stand clear of a raised load. Wider leg angles cut capacity, so follow a rigging chart. Retire any sling with stretched links. A trained rigger should plan heavy lifts.
How are alloy chain slings constructed and used in lifting operations?
Heat-treated alloy chain legs hang from a master ring, with a forged hook on each end and often a shortener. The ring goes on the hoist, and each hook takes a lift point. The 3/8 in x 10 ft sling uses G80 chain with 4 adjusters.
How do I identify high-quality alloy sling chains and ensure safety?
Look for a grade mark such as G80, a legible tag showing rated load and length, latched forged hooks and even, crack-free links. Buy from listings that state a working load. The chain drum lifter lists both its 2,000 lb working load and breaking load.
What industries commonly use alloy sling chains and why?
Construction, steel fabrication, auto repair, shipping and mining use alloy chain because it resists heat, abrasion and sharp edges better than fabric. It also lasts through repeated heavy lifts. The 10 ft four-leg sling reaches widely spaced lift points on frames and machines.
What are the main differences between synthetic slings and other types of slings?
Synthetic slings use polyester or nylon webbing that is light and gentle on finished surfaces, while chain resists heat, cuts and wear. Wire rope sits between them. The polyester bridle sling uses 1 in webbing and weighs 7.94 lb.
What is the difference between grab hooks and sling hooks on a chain sling?
Grab hooks have a narrow throat that locks onto a chain link to shorten or choke a leg, while sling hooks have a wider throat and a latch for eyebolts and lifting lugs. The 5 ft four-leg sling with latched sling hooks is rated for 11,000 lb.
How do I use the adjusters on a chain sling?
Seat the chosen link of a leg in its adjuster to shorten that leg, so each leg can be set separately to level an uneven load. Check every link sits fully before lifting. The 5/16 in x 10 ft four-leg chain sling has one adjuster on each leg.
Can a chain sling be used to lift a car engine?
Yes, a chain sling on an engine hoist is a common way to pull an engine. Bolt the hooks to solid lift points and adjust the legs so it hangs level. The 1/4 in x 5 ft four-leg sling is rated for 6,600 lb and lists engine lifting.
How should I store and care for a chain sling?
Hang it on a rack in a dry place, off the floor, so moisture and grit stay out of the links. Wipe off grease after use and keep it away from chemicals. The 3/8 in x 5 ft double-leg sling has a blackened chain and coated hooks that resist rust.