VEVOR Slush Machine Troubleshooting & How to Fix Them

vevor-slush-machine-troubleshooting-b-10561

With the combination of pulverized ice, slushie drinks create the joy of sipping the perfect chilled drink, as flavored drinks are the best food invention of all time. VEVOR Slush Machine is one of the best slush makers with unique ice tastes. Other drinks use ice crystals crushed from small ice cubes, while the slush makers make their own from water. Some slush machines can’t freeze, whereas commercial one comes with all the functionality, like the VEVOR.

However, every machine encounters an issue that disrupts the slush flow. But no worries if you’re the proud owner of a VEVOR slush machine or considering buying one. This guide will be valuable; you’ll learn how to troubleshoot the VEVOR slush machine when you experience any issues.

Troubleshooting Tip 1: VEVOR Slush Machine No Slush or Not Freezing

Known as one of the best slush machines in the world, VEVOR makes delicious and frozen drinks, cocktails, and other cool treats. But, in some cases, the VEVOR slush machine may be unable to freeze the liquids properly. Let’s find out the several reasons for this problem.

Irregular Cooling System Maintenance

Inadequate maintenance and cooling system working efficiency is one of the primary reasons for a slush machine. The slush machine can’t pass the heat if the coil, evaporator,  and compressor are clogged and dirty, which is essential for freezing. Follow the steps to keep the cooling system working perfectly:

Solutions

  • Compressor Care: For any damage and leakage signs, inspect the compressor. Upon finding any issue, contact a technician.
  • Cleaning: Using a soft brush, clean the evaporator and gently clean the condenser coils to remove dust.
  • Condenser Location: Avoid placing the condenser near walls or tight spaces, and make sure it has proper airflow.

irregular cooling system maintenance

Troubleshooting Tip 2: Slush Machine Leaking

To fix the VEVOR slush machine leak, determine where the slush machine leakage problems are coming from.

VEVOR Sluch Machine Outlet Leakage

There is nothing to worry about if your slush machine outlet is leaking. This is due to the condensation outside of the machine collected and discarded. But further steps are involved if the liquid and your slush are the same color, which can damage your slush machine.

Solution

  • Check Seal: Inspect whether the seal at the back of the tank is fitted perfectly and still intact. So, if a seal has a problem, consider replacing it.
  • Shaft Damaging: If the shaft is damaged, you can’t replace and repair it at home. For this, you need to call the professional for additional help.

Tap Leaking

An issue with the tap on your slush machine is usually caused by damaged seals and a stiff tap from where the leakage problem arises.

Solution

  • Lubrication: First, apply the lubricant at the tap’s rotation point and give a couple of turns to the tap to enter the lubricant into the mechanism.
  • Check Seal: If the leakage doesn’t resolve after the lubricating process, check out the seal on the tap head and ensure it’s not torn and in the right place.

slush machine leaking

Troubleshooting Tip 3: Slush Machine Won’t Start

If the VEVOR slush machine is not turning on, there might be a faulty switch and power panel problem. Furthermore, you should look for the blown fuse and power sources issue.

Solution

So, when the machine shows no life upon turning on, you need to do the following:

  • Plugin In Other Device: Change the plugin socket and check it out while plugging into another socket.
  • Inspect Control Panel: If any visible loose connection and damage are seen, consider replacing it.
  • Fuse: Use a multimeter to test the slush machine fuse and replace it with the same efficiency fuse.

Troubleshooting Tip 4: Slush Machine Shuts Down When Running

Sometimes, many people complain their slush machines stop working in the middle of the work and look for a solution but can’t find the reason and call a professional. Rather than paying a high amount to professionals, you can look down on this issue yourself. It’ll only take a few minutes.

Solution

  • Low Voltage: There might be a problem with a low voltage current due to the socket and switch. It’s important to receive the proper voltage when the machine is running. If you see enough voltage, but your machine is not getting the right one, then a professional will be helpful.
  • Incorrect Reading: Slush machines should have a reading between 11 and 13, so refill the machines with the correct reading.

slush machine shuts down when working

Troubleshooting Tip 5: VEVOR Slush Machine Error Codes

Sometimes, you find several slush machine error codes and fault displays on your slush machine but cannot understand what these are actually. To resolve these code errors, you need to follow some instructions:

LL Displaying

The following precaution can be needed for favor VEVOR slush machine troubleshooting when an LL error is displaying.

  • Sensor not connected: If an LL error is displayed, you need to check whether the wire is damaged or broken, and sometimes, you need to replace the temperature sensor.
  • Sensor is Short Circuit: The second possibility is that the temperature sensor is not installed properly, and connected wires can be damaged or broken. If the temperature measured by the temperature sensor exceeds 60, then replace the temperature sensor.

UH Code Displaying

  • High Grid Voltage: You’ll see this error when the grid voltage is too high, and the machine stops working. It’s an alarm message to notify you.
  • Low Grid Voltage: When the grid voltage is low, you’ll see a “UL displaying Code” on the screen. Buying a voltage stabilizer is recommended, so the voltage should be used in a range.

SLS Err Code Displaying

  • High Motor Current: This error will notify you about the high motor current. So, the alarm is generated and protects the shutdown.
  • Motor Replacement: You must replace the motor if it can’t be rotated or slow in motion.
  • Automatic Shutdown: Automatic shutdown will occur if the mixing shaft is blocked and the machine is after 5 minutes.
  • Changing Alarm Parameters: Stop the alarm after changing its parameter and then look at whether the motor is rotating.

slush machine error code display

Troubleshooting Tip 6: VEVOR Slush Machine Not Spinning

Before the water freezes, the slush machine rotates or stirs the mixture at a constant speed to bond the water molecules with the sugar molecules. By doing so, wet slurries and soft mixtures are created. But when the motor of the VEVOR slush machine not spinning, the blades become frozen; they don’t allow the slush machine to spin.

Solution

  • Turn off the Slush Maker: After turning off the slush maker, move the frozen blades, then again restart the machine. If the mixture doesn’t freeze or chill, the Ice Canister might not be cold enough. So add more salt and ice.

slush machine not spinning

Troubleshooting Tip 7: Strange Noises and Vibrations

Some noises are completely normal coming from the machine. But if you hear uncommon noises, then there must be an issue that needs to be resolved ASAP. But loud, squealing, whirring and grinding issues indicate there must be an issue with the gear motor at the machine’s back. Follow the below steps to determine if it’s true.

Solution

  • Lubricate Moving Parts: To reduce friction, apply lubricants.
  • Identify the source: Listen carefully to where the noise comes from if from the compressor, agitator or somewhere else.
  • Tighten Lose Components: Use appropriate tools to tighten up the lost components.
  • Contact Technician: You should call a technician if the noise persists or other issues occur.

FAQs about VEVOR Slush Machine Troubleshooting

1- What maintenance practices can prevent slush machine problems?

Every week, or after 500 drinks, your slush machine must be cleaned, sanitized, and lubricated. It is also important to use high-quality slush syrup.

2- Do I need to clean my VEVOR slush machine regularly?

VEVOR Slushy machines should be cleaned often to prevent bacteria and other pathogens from building up in the mixing tank if left unattended for a long time.

3- How long can you leave a slushy machine running?

Running frozen drink makers for an entire year is possible without turning them off or cleaning them. Just keep the exterior sanitized. Your frozen machine can pour frozen drinks for a whole year if you keep the water on and syrup and CO2 full.

Conclusion

Sometimes, when your chilled drinks and icy slush don’t freeze, there can be multiple reasons with your VEVOR sluch machine. You can solve this issue by troubleshooting the VEVOR slush machine and performing quick steps. You’ll find all the troubleshooting solutions here and tips on maintaining your VEVOR.

There aren’t any freaking errors, so don’t stop buying this incredible product.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top