Are you a beginner at plasma cutting? This comprehensive guide will turn out to be more informative than you ever think. After reading this article, you’ll know everything you need to start your project and the materials you need. Before starting, we want to tell you that plasma cutter equipment is used to cut materials that require electricity. So before starting your cutting, it’s essential to gather all the materials since, otherwise, you will end up disappointed.
Besides learning how to operate Pilot Plasma Cutter, we also guide you through a detailed live review of the VEVOR Plasma Cutter. So, if you are considering purchasing a new plasma cutter, you will not make a fool of yourself by buying an unsupported model.
Why Do You Need a Pilot Arc in Plasma Cutter
Pilot Plasma Cutter is an essential feature for metal cutting. You can cut a wide range of materials with high precision using a Pilot Arc Plasma Cutter.
Additionally, this tool allows you to cut rusty and dirty metal as you don’t need to depend on the conductivity you need with NON-Pilot Arc. You can even cut metal in a sideways direction.
Live Review of VEVOR Pilot Plasma Cutter
Cutting and expanding metal with the VEVOR plasma cutter is no longer challenging.
Furthermore, its efficient cooling system protects welding machines from being spoiled. To facilitate heat dissipation, holes on both sides are situated for heat emission, while the reverse side fan is for heat removal.
You can on Plasma Cutter by clicking the button and adjusting the ampere as you want; the gauge is used for air pressure.
Dry air runs through this pipe. It comes with a kit that hookup which you’ll not find in any other pilot plasma cutter.
The unit comes with 110 plugs. Plug 220 V into 110 plugs and then plug it into the switch.
The CUT-50F is reliable in cutting painted and rusty surfaces. For DIY jobs, it’s incredible to do high-level to small-level jobs with high speed and precision if we combine them at a low cost. You can easily cut alloy, aluminum, stainless, and mild steel.
This dual voltage pilot plasma cutter operates at 110 to 220V speed. The 4-meter torch length tip and electrode are easily replaceable and allow cutting the metal without touching the tip. So your metal will produce a smooth surface and get better cutting quality.
Features
● Plasma Cutting Torch
● Efficient Cooling System
● Installation Only Takes A Minute
● Air Filter Easily Connect To The Air Compressor
● A VEVOR Pilot Plasma Cutter features an LCD display and a control panel that is easy to operate.
Specifications
Input Voltage: 50/60Hz
Duty Cycle: 38A
Out Put Current: 10~50A
Input Current: 220V
Aluminum Cut Thickness: 16mm
Gas Supply: dry, oil-free air and clean
Gas Inlet Rate: 65 psi
Mild Steel: 50A
Steel Cut Thickness: 12mm
Efficiency: 89%
Welding Current: 50 A
Protection Degree: IP21
Power Factor: 0.93
Insulation Class: F
Dimension: 37/15.5/30 cm
Weight: 11kg
Pros
● Excellent Performance
● Plasma Cutter Torch
● Easy to Operate
● Wide Application
Testing of the VEVOR Pilot Arc Plasma Cutter
Let’s start the work and see how this machine work.
Cut half- and quarter-inch steel through the VEVOR pilot Arc Plasma Cutter. Then take a thicker metal sheet; we’re taking that was already rusty and didn’t clean.
Beam light touching the metal and cutting it off. Cutting slowly will allow you to see how easily the metal can be cut. This VEVOR pilot arc plasma cutter cuts your metal in a zig-zag shape if you want.
Now it’s time to cut quarter-inch metal. For this, you’ve to increase the speed to 35. Put the plasma cutter on the corner and cut. Believe it or not, it cut metal like butter.
For a long cut, you need to increase the ampere.
You can see how this plasma cutter gives you smooth cuts with its torch cutting.
Now cut .47, which is thicker than the previous metal. So, actually, you can use this plasma cutter to cut metal larger than its capacity. But to cut this, you need to slow down the process.
Now cut the quarter-inch metal, and it works so fast and quickly.
Let’s cut the quarter inch with 110, but on 110 V, it trips the breaker. But it gives a nice cut. Usually, Pilot Plasma Cutters don’t work with 110V, but this one is absolutely cool.
Now cut 8th-inch metal; usually, people use this size to cut the metal. But still, we didn’t get any problem with 110V to cut this size.
Conclusion
It seems that it’s difficult to find the plasma cutter at a low price and quality. Even you find it hard to look for local shops and many online stores. Many branded company Plasma Cutters are not up to mark, even at such high prices. VEVOR pilot arc plasma cutter is available online at such a low cost, and it comes with all the nozzles and bolts. You can cut squares, circles, and shapes with this plasma cutter.
