If you’re an aspiring blacksmith and want a groundbreaking start to your career, you’ll need to know a few things beforehand. One of these things is that you’ll need a good collection of tools, and one of them is an anvil.
An anvil is a blacksmith’s partner in their workstation. The essential equipment will help you pursue your career as it offers unparalleled reliability.
It is a multi-faceted tool that helps you shape your workpiece in numerous ways.
Owing to their hostile working conditions, anvils need to be of a terrifying solid construction. Or you didn’t know that the only way a metal workpiece will leave the anvil is after being struck with a hammer? As a result, anvils are heavy tools, mainly from heavy-duty steel construction.
Before we discuss everything you need to know when looking for an anvil, let’s jump straight to the best pieces in the market.
VEVOR Single-Horn Cast Steel Blacksmith Anvil For Sale
VEVOR prides itself on its quality productivity tools and equipment. Their single-horn anvil is the epitome of durability, as the tool weighs 60kg, all made from cast Steel. Since that’s heavy to handle occasionally, you’ll need to set it on a working bench for convenience. Again, you won’t be moving it unless it’s essential.
Even with the lack of portability, using the anvil is straightforward as it was designed to be used from a fixed position. Professionals won’t have any problems getting along, but novices may use a little information, but basically, there’s no learning curve to this. The round horn is used for shaping and bending or even smoothing workpieces that need curves. You can perform punching and twist your workpieces from the hardy hole.
You won’t need to worry about the workspace as you get a large working area on the VEVOR blacksmith anvil. The anvil won’t cause any workplace accidents as it poses a considerable working space for you to be comfortable while working. Its base is wide enough to give you the stability you need even when working on heavy workpieces.
The tool’s surface is polished with anti-corrosion material. Again, that helps keep away rusting by acting as an oxidation-relieving element. The VEVOR blacksmith anvil can be used for multiple reasons, including; straightening, hammering or shaping metal workpieces. However, it is only suitable for metalworks and may not be helpful in other fields.
Reasons To Buy
- It gives a large working area.
- The polished exterior helps with maintenance and aesthetics
- Durable construction
- Versatility
- Value for money
HappyBuy Single Horn Cast Steel Anvil For Sale
The HappyBuy blacksmith anvil offers a fully-polished working area to be comfortable running errands.
HappyBuy’s anvil has a dominant flat surface with a hardy hole used to hit your metal pieces and perform twists. The other side is made of a thick horn for twisting your metal workpieces.
The HappyBuy anvil is pretty heavy and weighs around 66 pounds. Moving the tool from one location to another will be challenging, but professionals recommend that you work with it from a fixed location.
Installation is easy as the anvil’s base has two punched installation points. You’ll need to fasten that to the bed material and ensure it won’t move around as you smith:
Since you’ll be working from a fixed position, the anvil provides multiple features and helps you focus on productivity. Durability is guaranteed on the HappyBuy’s anvil, as nothing can probably tamper with any part of the tool. It is meant to withstand constant hitting, so it should be okay with natural wear elements.
However, it has a polished coating to eliminate oxidation. If you like, there’s a color choice, so you can pick whichever best suits your preference.
Reasons to Buy
- Great solid construction
- Multiple uses of the same tool
- Fully polished
- Extra-long horn
VEVOR 100-Pound Blacksmith Countertop Anvil For Sale
VEVOR’s 100-pound blacksmith anvil is a groundbreaking success in the smithing industry. The most impressive feature of VEVOR’s 100-pound anvil is its stability. You won’t experience workplace accidents because the tool moved as you hit your metal piece. Everything works just fine, provided you installed the tool just right.
Installing the VEVOR blacksmith anvil is an easy task. You need to fasten the anvil’s base to a stable bench with the help of its base-cut grooves. After making sure that it’s sturdy and installed in the best possible way, you’re ready to start working. Next are your gear, a metal piece, and a hammer.
Operating/working on the anvil is not a big task too. There’s a flat surface where you can strike your metal pieces to the correct shape, and no procedures are involved. However, there’s no hardy hole where you can twist your hit or heated workpieces. Nonetheless, a horn will allow you to bend metal sheets to the shape you need.
Durability is out of the question for the VEVOR anvil. There are no natural elements that can cause reasonable destruction to your tool. The VEVOR anvil is polished with an anti-oxidant material to prevent oxidation, which leads to rusting.
You can use the tool in any metal shop as it supports all standard metalworking practices. Again, it’s from a reputable supplier and won’t give you any problems soon.
Reasons to Buy
- Reputable supplier
- Huge flat surface for hitting metal pieces
- Great stability during work
- Durable design
Beadsmith Dual-Horn Anvil
If you’re running low on budget or don’t have a lot of smithing to do, the Beadsmith dual-horn anvil could be your next metalworking tool. It is a cheaper option and a lighter one. However, it can perform the most common smithing activities, and its dual-horn structure is quite a great catch for those who do more metal bending than hitting.
Unlike some anvils made from cast iron, the Beadsmith spots a steel construction which explains its shiny profile. The top has ample flat-hitting space where you can comfortably work on hitting those metal rods till they’re red-hot. Again, It has a hardy hole to help with twisting thin metal rods or for punching when needed.
The Beadsmith dual-horn anvil is easy to install. Its base has punched installation points where you can attach the tool to a strong base and fasten it for efficient working. Again, the tool is small and will leave more space on your workbench for another related tool.
Beadsmith anvil’s steel construction is durable. The exterior is resistant to rusting, and corrosion, so don’t worry about wear. Its smaller size eases portability so that you can move it around quickly. If you’re a blacksmith or jewelry maker and want to achieve precision in your next project, try the Beadsmith double-horn anvil.
Reasons to Buy
- The dual-horn structure allows for numerous forms of bending
- Durable reinforced steel construction
- Versatile
- Easy to install and move around
VEVOR 88LBS Dual-Horn Anvil for Sale
The VEVOR single-horn Anvil has a rugged 55HRC-grade steel construction to increase its efficiency and longevity in service. Weighing around 88 pounds, this is among the heaviest anvils on the market and offers smiths an excellent opportunity to work on different metal workpieces efficiently.
Its solid base is heavy enough to give the whole thing immense stability to reduce accidents at work.
The VEVOR 88-pound anvil has a dual-horn structure that focuses on providing enough flat space for hitting metalworks. Again, you get two hardy holes on both horns that help you perform the turning and twisting of metal rods.
Moreover, if you’d love to punch through your metal sheet, the VEVOR dual-horn anvil will help you achieve that excellently.
As said before, the anvil is made from hardened steel that won’t wear in time. It also has an anti-oxidant spray coating to prevent rusting. Installation is easy to perform, too, as the tool comes with two pre-bored holes at the base.
Using the VEVOR 40-kg blacksmith anvil is easy too. The flat surface will help you hit your metal pieces, while the horns will help you curve sheets to your preferred shapes.
Reasons to Buy
- Offered by a reputable seller
- Solid construction
- Dual-horn structure
- Easy to install and use
- A versatile piece of equipment
Different Types of Anvils
There are numerous different types of anvils in the market. Here’s a breakdown of the significant anvil types you’ll come across.
- Cast-Iron anvils – These are made from Iron, as their name suggests, and are also called ASOs, which stands for Anvil Shaped Objects.
- Forging Anvils – Forging anvils are the most common anvil types. They are also called blacksmith anvils and weigh 75-500 pounds.
- Farrier Anvils – These are highly specialized anvils that range from 100-150 pounds in weight. Farrier Anvils come with unique features like their shoe-horse adjustment clip horns.
- Bench Anvils – Bench Anvils weigh 5-50 pounds. As their name suggests, they need to be used on a bench and primarily provide a hitting surface for metalworks.
- Stake Anvils – Stake anvils have been rare in recent times. However, they’re available and used for artistic ironwork and weigh around 15-20 pounds.
- Jewelers Anvil – These are used in jewelry and watch-making. They’re not heavy and weigh up to a few pounds.
What Should You Look For When Buying an Anvil
At a minimum, your metalworks anvil needs to have these two features:
- A flat surface
- A steel face
It’s excellent if your anvil has the following features:
- A Round horn
- A hardy hole
- Pritchel hole
- Heavyweight
- Steel construction
These are the minimum requirements for a good anvil. However additional features are encouraged, but they shouldn’t make the whole thing look crowded.
FAQs
Is an anvil worth it?
Yes. Anvils are essential, especially for those trying out a blacksmithing career. These tools will help you perform most operations on metal objects with ease. Again, their multi-faceted design helps with numerous functions from a single point.
Which is the best place to buy an anvil for sale
The VEVOR store. VEVOR offers a collection of the most reliable industry-grade productivity tools, with anvils in stock. You can also shop for anvils from Amazon or any other metalworks shopping outlet nearby.
