VEVOR Heat Press Instructions: User Manual & PDF Guide

Learn how to use your VEVOR Heat Press properly with our comprehensive VEVOR Heat Press Instructions. Whether you’re a seasoned user or just starting, our user-friendly guide is designed to simplify the process, ensuring you maximize efficiency and achieve flawless results.

Read our step-by-step instructions and gain insights into advanced techniques that elevate your heat press game. This manual goes beyond the basics, giving you the confidence to create stunning designs effortlessly. Along the way, we will highlight essential safety measures and address frequently asked questions to ensure your heat press process is safe and efficient.

So, let’s get started.

Note: Warnings must be followed carefully to avoid body injury.

Transfer Parameter(for reference)

Main parameters

1. How to turn on/off and how to start?

Press the switch button on the side of the thermostat to start the machine.
Press once to count down and press again to reset.

2. How to set the temperature/time?

Press once to set the temperature, press twice to set the time, and press again to exit. (It will automatically exit the temperature/time setup state in case of nooperation within 5sec.).

3. How to set the temperature/time to increase or decrease?

Set the time/temperature increase

Set the time/temperature decrease

4. How to change the temperature unit from ℃ to F?

In the power-on state, press “+” and “-” at the same time to change the temperature unit between ℃ and F.

5. How to set auto shutdown time?

Press and hold for 5 sec.to set the auto shutdown time.
(The factory default is 60min and the range is from 10min to 120min)

6. How to do temperature correction?

Press and hold for 5 seconds to enter the temperature correction setting. (Range±30℃,initial value is 0)

7. How to turn on /off the beep sound?

In the shutdown state, press “-“to turn off the sound and OFF is shown;
Press again to turn on the sound and ON is shown.

Tips: The max. set temperature of this machine is 210℃ and the longest time is 999sec.

Accessories installation diagram

Please perform all operations after power off

Plate transfer process

1. Select one side that matches the size of the plate to be sleeved with a silica gel pad, and remove the silica gel pad on the other side; Keep the side without silica gel pad facing upwards and heat it on the machine for 15 minutes;

2. Put the hot stamping paper on the plate that wants to print the pattern.
3. Remove the heating plate and place it on the plate, keeping the side without the silica gel pad facing upward.

This mug heat press machine is matched with 5 in 1 and 6 in 1.

Connect the cap baking machine to the main machine and set the time and temperature
Stick the transferred picture on the hat.
When the temperature reaches, place the hat into the hat baking machine and press tightly.

This mug heat press machine is matched with 8 in 1,10 in 1,11 in 1

Connect the cap baking machine to the main machine and set the time and temperature
Stick the transferred picture on the hat.
When the temperature reaches, place the hat into the hat baking machine and press tightly.

Main spare parts

1. Pedestal

2. Placement
3. Heating plate
4. Handle
5. Aviation connector
6. Button
7. Lift Knob
8. Overload protector
9. Power socket
10. Power switch
11. Column

Guarantee

The products are strictly based on the Consumer Protection Law of the People’s Republic of China and the Product Quality Law of the People’s Republic of China.The services are as follows:

Within 12 months,this product has the performance failure listed in the “Product Performance Failure Table”.
It is confirmed by SUNMETA and can be used for maintenance service free of charge.If out of validity,damage caused by force majeure,or human causes,the machine is not covered by the warranty,repair in charge.

Safety instruction

Before operating this unit, please read these instructions completely and save them.

Notice

• Keep unplug when moving the machine
• Keep unplug when installing accessories
• Place on a flat and stable platform and operate under ventilated conditions
• Wear special protective equipment when operating the machine

Warning

lmproper use may result in electric shock, fire, personal injury, and other damage.

• Do not use this machine in a hazardous location
• Do not use it when the machine is not working properly.
• Do not allow children or adults who do not understand this manual to operate this machine.
• Do not disassemble and repair this machine.
• Do not use an unsuitable AC outlet.
• Do not touch the heating plate when the machine is heating.

Warranty Content

Product Performance Failure Table

Circuit Board Wiring Method

1. Cables on the motherboard and display
2. NTC temperature probe
3. Hot plate
4. Main incoming line
5. Heating plate zero line
6. Main incoming zero line

FAQs about VEVOR Heat Press Manual

1. How do I know what temperature to set my heat press at?

Finding the optimal temperature for your heat press depends on your working material. Consult the material specifications or garment tag for recommended settings. Our VEVOR Heat Press Manual includes a comprehensive temperature guide to ensure you achieve the best results every time.

2. Do you leave the heat press open when heating up?

Yes, always keep the heat press in the open position during the heating process. This ensures even heating and prevents any potential damage.

3. How do I change my heat press settings?

To adjust your heat press settings, consult the control panel on your VEVOR Heat Press. Navigate through the temperature and time settings using the intuitive interface. Our manual provides detailed instructions, guiding you through the simple process of customizing settings to suit your project needs.

4. How long do you heat press a shirt?

The recommended settings for pressing a shirt on the VEVOR Heat Press are 390°F for 60 seconds. Achieve professional-quality transfers by adhering to this time and temperature combination.

5. What is the max temperature on the VEVOR heat press?

The VEVOR Heat Press offers a maximum temperature of 210°C (410°F). This versatile range allows you to work with various materials, ensuring your heat press meets the demands of different projects.

Conclusion

Our VEVOR Heat Press Manual is your gateway to a world of limitless creativity and precision. Whether you’re a beginner or an experienced user, our manual will simplify and elevate your heat press experience. You’ll learn about the basics and advanced techniques, gaining confidence with each page. Our guide will help you transform ordinary materials into extraordinary creations.

Join us on this exciting journey of craftsmanship, where precision meets creativity. Follow our VEVOR Heat Press Instructions and let’s create a masterpiece together! We’re excited to see what amazing things you’ll create.