As compared to a traditional fireplace, an electric fireplace takes less time to clean and maintain. This means that you do not have to deal with collecting wood or clearing out the ash before starting a new fire. An electric fireplace comes with an artificially built fire that emits heat, and you can switch it on anytime you feel the need to. It is low maintenance and requires less time to clean.
Here, you will learn about how to clean an electric fireplace, along with the tips to maintain every part efficiently. Let’s begin by first understanding the factors that can highlight whether your electric fireplace needs cleaning or not.
Does Your Electric Fireplace Need Cleaning?
Your doubt regarding the cleaning of an electric fireplace is genuine because there is no actual ash produced in it. So, there are no byproducts emitted that require ventilation. Heat and flame in an electric fireplace are produced artificially. Therefore, there is some relief regarding cleaning it on a daily basis. But it is not at all bad to clean it once in a while. It only ensures the smooth working of the appliance if you are able to identify any damaged part before it shuts down.
There are two main reasons for electric fireplace cleaning. Firstly, you can ensure the efficient working of the device with regular cleaning and maintenance. Secondly, you can enhance the interiors of your house with a clean electric fireplace because the collected dust can only repel your guests.
What Cleaning Does Your Electric Fireplace Need?
Now that you know the importance of electric fireplace cleaning, you must also be aware of the parts that you need to clean in an electric fireplace. They are as follows:
● Internal and external components
● Heater inlet & outlet
● Glass screen
● Ember bed
● Blower
● LED flame bulbs
How to Clean an Electric Fireplace? A Step-by-Step Guide
You have the list of components that require electric fireplace cleaning; therefore, you can begin the cleaning process by reading the steps thoroughly.
Step 1: Remove power supply
Before commencing electric fireplace cleanup, turn off the heater and let it cool down.
Step 2: Test the electrical parts
Inspect all wires and plugs to ensure they are in good working order. It is important because a worn-out or frayed wire can catch fire and damage your property. Consult a wiring technician and get it repaired or replaced as required.
Step 3: Clean the Heater outlets
Take a dry, clean piece of cloth and use it to clean the surface of the heater. Now, using a soft brush attachment to your vacuum cleaner, clear the heater outlets. Doing so will eliminate any dirt or dust from the heater and help you run it seamlessly. If you’re not sure how to clean electric fireplace heater, please read the manufacturer’s manual.
Step 4: Clean the glass frame
To know how to clean the inside glass of an electric fireplace, remove the front glass panel; you can use the instructions listed in the manufacturer’s manual. After removing it, use a clean piece of cloth to clean the glass from both sides. If there are any fingerprints or marks, use a damp cloth instead. Finally, use a lint-free cloth to dry it out. Although this process removes all the unwanted marks, if you still witness some, use a glass cleaner. Now that you’re familiar with fireplace insert cleaning, your unit can run for a long.
Step 5: Clean the interiors
Over time, dust may enter your electric fireplace. You can clean the interior surface with a dry clean cloth. The electric fireplace is mainly composed of two parts: heater and flame effects.
While a simple cloth can remove the dust buildup, using a vacuum is found beneficial for removing more difficult deposits. However, one must not apply too much pressure, or you may risk compromising the vital technical parts.
Finally, vacuum the dust from the ember bed. Use a vacuum and then clean the dust from electric fireplace with a microfiber cloth. After wiping all the dust from different components, insert the front glass panel back onto the fireplace.
Tips for Maintaining Your Electric Fireplace
Even though you clean your electric fireplace regularly, there is a need to perform some maintenance steps that can help you avoid any expensive replacement. Read about the tips in detail about electric fireplace maintenance.
1. Replacing a light bulb
Begin with switching off the electric fireplace and allow it to cool down. Usually, the light bulbs are installed at the back of the fireplace. If you know how to take apart electric fireplace, proceed further. One can reach it via the rear panel. If this panel is secured with screws, remove them. However, the best way is to consult your owner’s manual for instructions; it will guide you on how to access the light bulbs in your specific unit to clean the electric fireplace efficiently.
After the panel opens up, you can easily find the bulbs. But before replacing it, check the manual for the right product. If you are lucky, your electric furnace bulbs may be maintenance-free and may not require replacement. In case you’ve lost or misplaced your manual, take your bulb to the store to identify the bulb your fireplace needs.
Once you have the bulb, finish the installation process and bolt the control panel back in its original place. Plug in the electric fireplace and enjoy the ambience.
2. Keep a Check on the Exterior
It takes just about a few minutes to maintain the exteriors of your electric fireplace. Unlike the traditional fireplace, here, you do not have to clean the ash or get a new load of wood to start a new fire. You can dust the exteriors of the electric fireplace with a damp cloth or paper towel to have a clean fireplace.
If you know how to clean an electric fireplace, begin by cleaning the glass frame. You can enhance the aesthetic value of the appliance along with its appearance. Only use a damp cloth and soapy water; avoid using any harsh cleaning solutions. Once you have cleaned the entire glass screen, make sure to wipe the screen dry with a paper towel so that there are no lines on it.
3. Clean the Fan
The fan is the most important component inside electric fireplace. It is responsible for providing sufficient heat. You can check your fan’s rotation cycle and determine if it is getting stuck while rotating. If not, then your electric fireplace is in good working condition. However, if there is any hesitation in the rotation, clean the fan with a brush to remove any dust particles by taking off the metal cover.
You can also use a vacuum to clear any debris. The benefit of electric fireplace maintenance is the longevity of the device. However, make sure the electric fireplace is disconnected from the main switch while performing the cleanup. Refer to the instruction manual if you have any confusion, or call a professional if there is a need to replace or repair it.
VEVOR Electric Fireplace: An Easy-to-Care-For and Efficient Solution
To get rid of all the extra maintenance and cleaning tasks, get yourself a VEVOR electric wall-mounted fireplace. It takes just a minute to clean it, and another advantage is that it is easy to maintain. There are various models available, and each one comes with multiple inbuilt flame colour options. And that is why you do not have to worry about replacing each flame every now or then.
You can use the multi-operational mode of the electric fireplace and enjoy the sleep mode to maintain a constant temperature throughout the night. The adjustable timing feature can last for twelve hours without any required change. The hard-wired installation support keeps your wiring away from all the dust. It will take only a few minutes to set up the unit on the wall. However, do remember to leave some space between the firebox and the ceiling.
This electric fireplace will make your entire winter season warm and cosy. A simple vacuum cleaner can assist you with the cleaning process, and there is no difficulty in re-assembling the electric fireplace if you have opened it. The manufacturing manual can assist you with it.
FAQs about Electric Fireplace Cleaning
1. What safety precautions should I take before cleaning the fireplace?
For an electric fireplace cleaning, make sure you unplug the unit before proceeding with cleaning it to avoid any unnecessary accidents, such as electric shocks. Also, wear your slippers while working with an electric appliance and use a dry cloth to clean it from the inside.
2. How do you clean an electric fireplace heating element?
You can utilise a vacuum cleaner to clean the heating element of the electric fireplace. Firstly, remove the cover of the heater to expose the heating element and use the vacuum to collect any debris or dust particles stuck in it. You must clean the cover as well.
3. Is there a filter in an electric fireplace?
Usually, an electric fireplace does not have a filter. However, there can be dust filters present inside to collect dust. To clean inside electric fireplace, you can also use a vacuum and make sure it is in good working condition.
Final Words!
The bottom line is that it is for your own benefit that you plan a regular cleaning and maintenance schedule for your electric fireplace. Otherwise, you might have to deal with some surprising expenses that can rip your pocket apart.
Therefore, it is safe to say that this guide to clean an electric fireplace with electric fireplace maintenance tips is useful if you are a beginner or a first-time user. Follow the steps carefully in the right order and get yourself a fine working VEVOR electric fireplace. You can also check the manufacturer’s manual or call any professional engineer for replacement or repair tasks.
