In the commercial kitchen or a house, ice is essential at any place, whether it’s refreshing flakes or old-fashioned cubes. When a commercial ice maker runs daily, multiple issues can arise occasionally. Keep your establishment from freezing.
How will you handle it if your commercial ice machine stops making ice? Naturally, you’ll be tense and feel like you’re in trouble. You can make a whopping $$$ from your business by troubleshooting your ice machine and avoiding any industrial ice machine repairs.
Understanding Common Ice Maker Problems If Commercial Ice-Machine Not Working
Many people are confused: why doesn’t my ice maker freeze up? But before thinking about a commercial ice machine troubleshooting, understand the common problems you can face while using your ice machine:
Common Ice-Maker Problems
There might be many problems if your ice machine stopped making ice. So, you need to identify them and find out how to adjust the ice maker to make more ice.
- Unplugged Unit-Call the tech if you observe that your machine power cord is damaged and needs replacing.
- Machine Gets Off-Press VEVOR ice machine reset button, ON button, or flip the ON/OFF toggle switch.
- Fuse or Tripped Circuit Breaker– Check out the circuit breaker if it needs reset, fused, or blown. Replace the fuse if it’s blown.
- Leaking Water– An improperly connected water line, a faulty inlet valve, or a cracked water line may be the cause.
- Producing Noise– An un-level, unstable unit or a defective water inlet valve can make a motor noisy.
- Frost Buildup- A poor door seal, switch, and ice dispenser door can cause the problem.
Proactive Measures: Preventing Ice Maker Woes
By incorporating the following measurements in your daily routine, you can prevent yourself from commercial ice maker repair and enjoy a consistent supply of high-quality ice. For this, you should do the following:
- Regular Cleaning: Keep your ice quality up to mark by preventing it from mold and bacteria.
- Maintain Proper Water Pressure: Small or misshapen ice cubes can be caused by low water pressure.
- Replace Water Filter: Removing contamination ensures fresh-tasting ice.
- Monitor Freezer Temperature: Improper freezer temperature can impact ice production.
- Avoid Overloading the Machine: Don’t overload the machine; it can obstruct ice flow and affect ice production.
- Fix Leaks Promptly: Fix leaks as they can damage other appliances and the surrounding area.
- Regular Maintenance Checks: Ice machine maintenance checks are essential before they become major issues.
- Follow Manufacturer Guidelines: It’s important to follow the manufacturer’s recommendations.
- Inspect Water Lines: A damaged or kinked water line can leak or reduce water flow.
VEVOR Ice Machine Not Making Ice: Troubleshooting Steps
Let’s take a look at some VEVOR ice machine troubleshooting processes. Do some troubleshooting steps when your ice machine is not making ice or the ice machine is making slow ice.
Ice-Machine Making Ice In Low Amounts or Making a No Ice
- Clogged water line: Clean blockages in the water line.
- An Unclean Condenser: Ensure the air condenser is clean on air-cooled units. You can do it yourself every month, or you can hire an expert technician to do it.
- Disconnected Water Line: Look for a disconnected or drained water supply valve.
- Dirty Screen or Floating Valve: To ensure proper ice production, clean the screen or valve.
- High Air-Temperature: Keep the unit away from hot equipment and cramped spaces. Get an authorized technician to fix it if the temperature’s still high.
No Ice Release from Machine, Slow Harvest
If your ice-machine isn’t making ice or is taking too long to harvest, check these things:
- Unlevel Surface: Ensure the machine is on flat ground with adjusted feet. If you don’t know how to do it, then for help, contact an experienced technician.
- Machine Needs To Be Cleaned or Dirty: You should clean your ice machine twice a week or as the manufacturer recommends.
- Become too Hot: Avoid placing the unit too close to hot items. It is essential to call an authorized technician if the unit still has a high temperature after being moved to a cooler area.
- Leakage of Water-Regulating Valve: Replace the valve with an authorized technician.
- Off or Broken Control: Check if the machine’s power control is off or broken. A technician can fix a broken switch or button.
Machine Doesn’t Go Into Harvest Mode
See the following problems if the commercial ice machine not dropping ice or doesn’t go into harvest mode:
- Shallow Or Thin Ice: Machines can’t harvest thin or shallow ice.
- Ice Thickness Instrument Is Un-cleaned Or Disconnected: According to the manual, reconnect and clean it.
Dive Deeper: Advanced Troubleshooting Techniques For Ice-Maker
Some potential commercial ice maker troubleshooting methods for handling complex and common ice maker problems are listed below.
Poor Ice Quality, Soft Or Murky
If the ice is soft or murky, check for the following potential issues:
- Damaged or dirty Water Filters: Ensure all your water filters are clean and changed.
- Dirty Machine and Needs To Be Cleaned: Read the instructions in the user’s guide about cleaning the unit every two weeks.
- Poor Water Quality: If the ice maker makes wet ice, it can be because the facility has bad water. Look for ways to improve the ice by treating the water.
Shallow Or Incomplete Ice
When ice is shallow and not able to be formed properly, look for problems like:
- Broken Water Filter: Replace the water filter accordingly if it’s broken.
- Low Water Pressure: The facility’s water pressure shouldn’t be inadequate. For assistance, contact your utility service or company accordingly.
- Low or High Water Level: It may be necessary to adjust the water level probe. To fix the problem, consult the manufacturer’s manual.
- Out-of-adjusted ice thickness probe: As per the instructions, readjust the probe in the manufacturer manual. Contact a technician if it doesn’t get aligned.
Repairing with Confidence: DIY Commercial Ice Maker Fixes
Sometimes, when your ice machine is not making ice, there should be some other problems that are important to identify at a time for your commercial ice-maker repair.
- Noisy Ice Maker: For a smooth operation, lubricate or replace the noisy motor parts.
- No Ice Production: Check out if the water inlet valve is working and getting enough water supply. Replace a faulty valve if needed.
- Bad or Smelly Taste Ice: Regularly replace the water filter for fresh and tasty ice assurance.
- Inconsistent Ice Size: If your water inlet valve isn’t working, adjust or replace the water pressure.
Safety Consideration For Ice Machine Repairs
- Wear Safety Gears: Protect yourself by wearing gloves or safety glasses, depending on what you’re fixing.
- Power of the Machine: Before attempting VEVOR ice machine repairs, turn off the machine to avoid electrical hazards.
- Usage of Proper Tools: Always use the proper tools for commercial ice maker troubleshooting.
- Check out Gas Leakage: Check your ice machine for gas leaks if it has a gas connection.
- Secure Water Connection: Ensure water lines are sealed and connected properly to prevent accidents.
- Seek Help from a Professional: Contact a professional if you’re uncomfortable with any industrial ice machine repair.
FAQs About VEVOR Ice-Machine Troubleshooting
Why is my VEVOR ice machine not making enough and fast ice?
Ice makers can’t make ice if the water line is kinked or a valve is not fully opened or blocked.
How to fix a slow ice-maker?
Fix slow ice-making by turning down the freezer temperature, opening the freezer door less frequently, and checking the water line for clogs or pressure.
Why does my ice maker not produce any ice?
Replacing the water filter first is recommended, but if it still happens, check for kinked water supply lines or a saddle valve.
Conclusion
Through reliable solutions and quality, ensure your ice machine maintenance. Get a continuous supply of ice upon trusting VEVOR ice machine troubleshooting methods.
From commercial ice machine troubleshooting tips to high-quality replacement parts, VEVOR is your ally in maintaining the perfect chill. We say ‘Solve, Repair, and Ice On! Let VEVOR take care of your ice machine!
Can you address the reasons for my vevor commercial ice maker that would cause the ice grid to only reach 01 degree Celsius while making ice, and at end of cycle it only reaches 05 degree Celsius and won’t drop the ice before it starts a new cycle ? This problem was not mentioned in the above article. And this machine is not even 6 months old.
It is recommended that you report this problem through “Contact Us”, or send an email directly to support@vevor.com to contact customer service for after-sales service. Thank you for your supporting and understanding.