Lifting heavy metal objects has never been easier than with the VEVOR Magnetic Lifter. This alters the way you go about your handling of ferrous metals within a workshop or job site. Reliability, efficiency, and safety are assured in every lift.
Table of contents
Main Features of the VEVOR Magnetic Lifter
High Pulling Capacity
A capacity to lift up to 220 lbs will really let it be applied to handling small metal components as well as big steel plates.
Safety Factor of 2.5
Guarantees safe lifting operations of a considerable margin between the maximum working load and the breaking point.
Neodymium Steel Construction
Provides strong magnetic force and strength. Indeed, neodymium magnets are one of the world’s strongest permanent magnets. You will be assured of a firm grip of your loads.
Easy Release Mechanism
Makes the attaching and detaching of your loads relatively easy. The ergonomic handle allows you to control magnetic force in an easy and comfortable manner.
No Electricity Required
Being a permanent magnet, it does not rely on electricity. Therefore, it completely eliminates the possibility of power failure during critical operations.
Compact and Portable Design
Its manageable size and weight make it portable and easy to relocate and use at various locations.
Environmentally Friendly
Our tool basically relies on magnetic force rather than electricity. So, energy consumption is reduced. This makes it a greener way of doing lifting work.
Recommended For Your Project
How to Use This Magnetic Lifter?
- Inspect the Lifter and Load: Before using, check the magnetic lifter for damages or wear. Ensure the surface of the load is clean, flat, and free from rust or paint that may affect magnetic adhesion.
- Place the Lifter: There should be proper positioning of the magnetic lifter directly onto the center of the metal load. Proper positioning ensures balance and safety.
- Activate the Magnet: You need to pull the handle to turn the magnetic force on. You will now feel the grip of the magnet on the metal as it holds the load firmly tied.
- Lifting the Load: You can now place the lifter in the hoist or crane. Raise the load slowly to ensure that the load is effectively attached. Keep the lift vertical and upright to prevent any slippage on the sides.
- Safety During Transport: Position and relocate. Then, you should shift the load to the desired position at a steady and non-stuttering rate. Do not jerk the load or shock it.
- Lower and Release: Finally, gently set the load on the ground. Force the handle to demagnetize the lifter and dispose of the load in a safe manner.
Safety Precautions While Operating the Magnetic Lifter
- Never Exceed the Rated Capacity: Never exceed the 220-lb capacity for safety’s sake.
- Avoid Side Pulling: Tipping can reduce the magnetic force, and the load will drop.
Case Studies in the Real World
Increasing Efficiency in a Metal Fabrication Shop
VEVOR Magnetic Lifter was used in a metal fabrication shop to handle steel plates. Here, productivity increased by 30% as well as a significant reduction in work-related injuries because of reduced manual handling
Construction Sites Safety Improvement
Construction companies recorded an improved safety record after adopting our magnetic lifter because of its ease and reliability in performance. This significantly reduced the risks associated with handling heavy metal beams.
Applications of VEVOR Magnetic Lifter
- Machine Factory: Handling metal parts and pieces for assembling or fabricating.
- Warehouse: Assist in easy movement of heavy steel, ensuring enhanced stock control.
- Construction Site: Moving metal beams, plates, and other structural parts on-site.
- Metalworking Shop: Aid to machine, weld, and fabricate with accurate placing of the materials.
- Shipyards and Docks: Manufacturing, moving heavy metal components for ships, and ship restoration.
- Automotive Industry: Safe transport of heavy auto parts and machine parts.
Frequently Asked Questions
Does the magnetic lifter lift non-ferrous metals?
No, the magnetic lifter is designed specifically for ferrous metals such as steel and iron. It has no application with non-ferrous metals like aluminum or copper since these are not magnetic.
What is the safety factor, and why is it important?
The safety factor of 2.5 means the lifter can handle loads up to 2.5 times its rated capacity under ideal conditions. It provides a margin of safety to prevent accidents.
How do I take care of the magnetic lifter?
You should clean and get the lifter free from metal debris or dust. You can also inspect it periodically for wear and tear. Do not place it in a wet, damp, or moist location because it is prone to corrosion. Plus, keep applying rust-inhibiting oil if necessary.
Is there training required for operating the magnetic lifter?
Although the magnetic lifter is user-friendly, you are advised to undergo basic induction training on proper usage and safety precautions for safe operations.
Are there conditions wherein high temperatures affect the magnetic lifter?
The high temperature confines it from having magnetic properties. Its possible range of operational temperature is found within the lifter’s manufacturer guidelines.
Conclusion
With this magnetic-powered lifter, you can come out with significant savings in fuel and will save on time in comparison to other operations. For all who deal with heavy metal loads, this innovative tool ensures an efficient and safe performance in lifting. So, we recommend you should not let your heavy lift weigh you down. It’s time for you to get a VEVOR Magnetic Lifter and see the difference.
