Sealing boxes or cartons feel like trying to find your way out of a maze with a blindfold on. It’s super frustrating and it takes a lot of time to finish. But what if there was a way to make it all way easier? VEVOR Manual Water Activated Tape Dispenser is the ultimate solution for sealing packages. It has an adjustable tape length and ensures safe cutting.
Let’s explore some interesting features of this tape dispenser. A 5-step guide to use this machine is also shared!
Table of contents
5 Features of VEVOR Manual Water Activated Tape Dispenser
1. Adjustable Tape Length for Custom Cuts
The VEVOR Manual Water Activated Tape Dispenser has an adjustable tape length. This allows you to customize tape lengths from 3 inches up to 42 inches. It provides flexibility for different box sizes.
With a simple twist of the dial, you can select your desired tape length. It ensures every box is sealed efficiently and consistently.
2. Smooth Operation with Water Activation
This dispenser uses water to activate the adhesive on the gum tape, ensuring a strong, tamper-evident seal. The water reservoir is easy to fill, and the integrated brush evenly applies water to the tape for consistent adhesion.
You have to simply pull the handle. Then, the dispenser wets, cuts, and delivers the perfect piece of tape every time.
3. High Capacity and Versatility
This dispenser has a large tape roll capacity. It can handle rolls up to 5 inches in diameter. This allows you to go longer between roll changes. It can accommodate tapes up to 3 inches wide. Hence, it can easily be used for different packaging requirements, like sealing standard shipping boxes or large cartons.
4. Built to Last
This dispenser is made with a strong steel frame and durable plastic components. Hence, it can withstand the demands of high-volume packaging. The non-slip base ensures stability during use.
The dispenser’s ergonomic handle provides a comfortable grip for long-term use.
5. Safe & Secure Cutting Mechanism
The VEVOR Tape Dispenser comes with a safe cutting mechanism. It precisely slices the tape without requiring excessive force. This not only improves efficiency but also reduces the risk of injury. Hence, it is the most reliable tool for daily packaging needs.
5 Steps To Use VEVOR Manual Water Activated Tape Dispenser
The VEVOR Manual Water Activated Tape Dispenser is user-friendly too. It offers efficient packaging and secure sealing. Here’s a step-by-step guide to help you set up and use it effectively.
Step# 1: Setup
- Unbox and Place: Unbox the dispenser and place it on a stable, flat surface. Make sure the base is secure to prevent slipping during use.
- Fill the Water Reservoir: Locate the water reservoir at the front of the dispenser. Fill the reservoir with clean water up to the designated level. Insert the wetting brush into the reservoir, ensuring it’s fully submerged.
Step# 2: Load the Tape
- Lift the Roller Bar: Open the roller bar by lifting it upwards.
- Position the Tape Roll: Place your roll of water-activated gum tape onto the dispenser spindle. Ensure the tape unwinds from the bottom of the roll, with the adhesive side facing down.
- Feed the Tape Through: Pull the tape under the roller bar and through the wetting brush. Guide it through the cutting blade at the front of the dispenser.
- Adjust the Tape Guide: Adjust the tape guide to fit the width of your tape roll, ensuring a smooth feed.
Step# 3: Set The Desired Tape Length
- Use the dial to set the desired tape length, ranging from 3 to 42 inches.
- Turn the dial clockwise to increase the tape length and counterclockwise to decrease it.
Step# 4: Dispense the Tape
- Pull the Handle: Pull the handle firmly to activate the wetting brush, cut the tape, and deliver it. Ensure that the brush thoroughly wets the tape for optimal adhesion.
- Apply the Tape: Take the dispensed tape and apply it to your package. Press down firmly along the tape to ensure a strong, tamper-evident seal.
Step# 5: Maintenance and Cleaning
- Refill Water Reservoir: Monitor the water reservoir and refill it as needed for consistent wetting.
- Clean the Wetting Brush and Reservoir: Remove the wetting brush periodically and rinse it with warm water. Wipe down the reservoir and the cutting blade to prevent adhesive buildup.
- Check for Wear and Tear: Regularly inspect the cutting blade and replace it if it becomes dull or damaged.
FAQs about VEVOR Water Activated Tape Dispenser
What types of tape can I use with the VEVOR Manual Water Activated Tape Dispenser?
You can use any water-activated gum tape with a width of up to 3 inches. This includes both reinforced and non-reinforced tapes.
How do I clean the dispenser after use?
Simply remove the brush and rinse it with warm water. You can also wipe down the reservoir and cutting blade to remove adhesive buildup.
How often do I need to refill the water reservoir?
The reservoir can typically handle multiple rolls of tape before needing a refill. Monitor the water level periodically to ensure consistent wetting.
Can this dispenser handle both long and short tape lengths?
Yes, the dispenser’s adjustable dial allows you to cut tape lengths ranging from 3 to 42 inches.
Is the cutting mechanism safe?
Yes. The cutting blade is securely positioned and only activates when the handle is pulled, reducing the risk of injury.
Closing Words
The VEVOR Manual Water Activated Tape Dispenser is an excellent tool for your business to streamline the packaging process. With adjustable tape length, smooth water activation, and a durable build, it is the most precise and efficient solution. With this too, you won’t have to deal with messy and inefficient packaging.
Visit VEVOR today & experience the difference for yourself!
