VEVOR Calibre de inglete de precisión, calibre de inglete para sierra de mesa de aluminio de 18" con extremos en ángulo de 60 grados para soporte máximo de material y un tope de corte repetitivo, cerca de sierra ingletadora con escala de marcado láser

I bought this miter gauge 2 years ago and I use it almost daily, its very accurate and easy to adjust. Precision adjustments are a breeze. The parts fit well together and adjustments are quick and simple. The repetitive cut flip top is simply amazing. I do a lot of cutting where I am making similar cuts over and over and this ensures precision cuts every time.

it is the quality product that I expected!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

As others have said, there's a complete lack of instructions, but it's a simple product. If you can work a table saw, you can figure out the assembly of this miter gauge without too much trouble. Hex wrenches and a screwdriver head are included, so putting it together was fairly simple, and the track fit snug in my Dewalt jobsite saw. Overall for the price it's a good value.

I have found that this miter gauge is great did not have to dial it in came just perfect. That alone has made me happy. It is made of quality materials.

Better than the miter gauge that came with our cabinet saw. Stop block gets annoying at times, won't stay up and out of the way, even with tightening the cleaning mechanism. A small defect, admittedly. The gauge is one of our favorites. The price is extraordinary.

Product arrived in good shape and fits my Skil TS6307-00 10\" tablesaw. Note that the t-tracks are for 1/4\" t-bolts and not the more standard 5/16\" hardware. The unit I received was slightly different from the photo in that the measure scale across the top is right-to-left, which is good! There is an offset for the stop block. It's important to know that the stop block has a black plastic part that can be adjusted with an allen wrench (not provided) and you are supposed to line that black end with the ruler. I scribed a white line on my black plastic bit and was able to align it with the 0\" mark on the tape without any problem. Because the stop block flip-down is on the right side of the block, you can only use it out to about the 14.5\" mark on the fence (to the left). Fine for me now, but I might make my own extension someday...there are black caps on the ends of the fence to cover the t-track slots and these can be removed if you wanted to add your own extension. Overall, a nice versatile miter gauge and fence for an excellent price.

This is an excellent miter gauge, and an excellent value. A perfect replacement for the mostly useless miter gauge that came with an otherwise excellent table saw. And the cost is almost too good to be true - when you look it over and see how well it is made, you'll likely be astonished that it doesn't cost more than double what it actually costs (for as long as it remains on sale). The only gripe I had is that you are on your own to figure out how to put it together, however it is trivial with just one minor exception. There are three main parts: the protractor base, the minimal fence or whatever you call the piece that you rest the workpiece against, and the larger fence which has markings for length. The larger fence is made from extruded aluminum, which is the near-ubiquitous way to make a part that needs to have a precisely made channel-slot. The smaller fence attaches to the protractor using the three screws that are obviously for that purpose. The smaller fence has a couple of screws that extend into the channel-slot in the larger fence. At the opposite end of those screws (opposite from the head of the screw), each screw is threaded into a small block of aluminum. This small block of aluminum is the part that grabs onto the larger fence so that they can be clamped together. What you have to do is first remove the plastic cap from one end of the larger fence (the one made of extruded aluminum), then when holding both of the fences in the approximate proper relationship to each other, and at the same time positioning the two screws so that the small aluminum blocks are in the best position to permit you to slide the two of them into the channel at the end, you do that. BUT, those little blocks of aluminum can go onto the screws either of two ways, only one of which is correct. You have a 50/50 chance of getting it right by guessing, and if you get it wrong, it isn't a big deal to do it over when you discover that the two rails will not clamp together tightly.

This is an excellent product comparable to much more expensive miters and much cheaper!! Vevor customer service is awesome! Would definitely buy again from them

No assembly instructions

for the money best table saw guide i ever bought, easy to adjust and easy to use 1/3 the price of competitors...