VEVOR US ES
Seleccione el país/región, el idioma y la moneda que prefiera para comprar.
Entregar en
Your Address
Hola, Regístrate
Cuenta y pedido
Categorías
Descargar Aplicación VEVOR
Exclusivo $5.00 de Descuento en Tus Primeros Tres Pedidos de Aplicaciones.
Escanea el código QR para descargar
Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación
FLKBZPBB10FTDB7VCV1

Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación

Precio con IVAVer detalles
Ahorra hasta un 15% con precio PRO. Regístrese para obtener una cuenta PRO gratuita.
Exclusivo $5.00 de Descuento en Tus Primeros Tres Pedidos de Aplicaciones.
Descarga Ahora
Exclusivo $5.00 de Descuento en Tus Primeros Tres Pedidos de Aplicaciones.
Escanea el código QR para descargar

Acerca de este artículo

  • Diseño de alta compatibilidad: Número de pieza de repuesto: 007-F5-7IFC. Diseñada específicamente para sistemas de calefacción por suelo radiante, esta bomba de circulación de hierro fundido ofrece un caudal máximo de 23 GPM y una altura de 16 pies. Con una conexión de brida de 1", reemplaza sin problemas su bomba de recirculación de agua caliente existente, satisfaciendo las necesidades de circulación de hogares y redes de tuberías complejas con facilidad.
  • Válvula de retención incorporada: diseñada para garantizar que el agua fluya en la dirección correcta, nuestra válvula de retención evita el reflujo, lo que mantiene la estabilidad del sistema y extiende la vida útil de la bomba. Nuestra bomba de circulación de agua caliente minimiza las necesidades de mantenimiento y reemplazo, lo que permite que el sistema funcione sin problemas.
  • Funcionamiento silencioso: nuestra bomba de circulación de hierro fundido, que cuenta con un motor de cobre puro y un diseño interno exclusivo, funciona a un nivel de ruido máximo de solo 45 dB. Disfrute de un ambiente tranquilo en el hogar sin ruidos molestos, incluso cerca de las zonas de calefacción.
  • Caudal ajustable: con tres configuraciones de velocidad ajustables, adapte la velocidad de circulación del agua a sus necesidades estacionales o requisitos de uso específicos. Logre una mayor eficiencia energética y comodidad con facilidad.
  • Construcción duradera: nuestra bomba de recirculación de agua caliente, construida con un exterior de hierro fundido y con clasificación de protección IP44, soporta un amplio rango de temperaturas (de 35,6 °F a 230 °F). El motor de cobre puro de alto rendimiento y la caja de conexiones completamente sellada garantizan estabilidad y seguridad a largo plazo para un funcionamiento confiable.

Frecuentemente Compramos Juntos

Quien compró este articulo también compró

Bomba de circulación de agua caliente VEVOR 007-F5-7IFC 110 V 70 W 23 GPM Bomba de recirculación
Bomba de circulación de hierro fundido 007
Nuestra bomba de circulación ofrece un caudal máximo de 23 GPM, una elevación máxima de 16 pies, una conexión de brida de 1" y una válvula de retención incorporada. Es un reemplazo ideal para su bomba de recirculación de agua caliente existente. ¡El ajuste de caudal de tres velocidades le permite personalizar la circulación del agua según la demanda estacional!
Con un motor duradero totalmente de cobre, esta bomba de circulación de hierro fundido proporciona una potente circulación de agua con un consumo mínimo de energía. Disfrute de un rendimiento duradero que mantiene bajos sus costos de energía sin sacrificar la eficiencia.
Diseñada con dos sellos de goma robustos, esta bomba de recirculación de agua caliente evita fugas en los puntos de conexión, protegiendo su sistema de calefacción contra daños por agua y ayudándolo a evitar reparaciones innecesarias o desperdicio de agua.
¡El mantenimiento adecuado es fundamental! Después de la instalación o el mantenimiento del sistema, recuerde liberar el aire de la válvula de escape para garantizar un funcionamiento sin problemas y evitar posibles daños en el sistema.
Asegúrese de que la bomba de circulación de agua caliente esté instalada en un entorno seco con un sistema de drenaje que funcione bien. Esto evita que las fugas de agua provoquen posibles daños a la propiedad y mantiene un rendimiento óptimo.

Especificación

Número de modelo del artículo
007-F5-7IFC
Caudal máximo
23 GPM
Elevación máxima de la cabeza
16 pies
Consumo máximo de energía
70 W
Tamaño de conexión
Brida de 1"
Rango de temperatura del agua
35,6-230 °F / 2-110 ℃
Materiales principales
Hierro fundido (carcasa) / Plástico (caja de conexiones)
Peso neto
6,17 libras / 2,8 kg
Preguntas y Respuestas
3 Preguntas
Can pump be installed in vertical pumping up position as needed without any problems to the pump?
Please refer to the installation instructions in the manual.
Por vevor
My system is lay out with a 3/4" pipe. Do you have a Hot water circulation pump for a 3/4" piping?
Sorry, we do not have a hot water circulation pump for a 3/4" piping.
Por vevor
How do you know if the check valve is stuck
If the water is stopped from flowing out, then check whether the pipeline pressure changes after the pump is stopped. If it is fixed at a certain pressure value, it means that it has been stopped.
Por vevor

Opiniones de los Clientes

10 Reseña(s)
Filtros claros
FirecrackerFrank FirecrackerFrank
Works great
seems to be very durable and it’s reduced the time for hot water at bathrooms farther from the water heater in our home. No leaks and was very simple to install.
GoldenGail GoldenGail
Works great
I've had this recirculating pump in use for over six months now. It gets the hot water to my shower in just a few seconds. No more wasting all that water waiting for shower to get warm. Plumber had no problem installing it. Great purchase.
HillCountryHarry HillCountryHarry
Well worth the money and SO easy to install.
After years of waiting for water to reach the far areas of my house, I had finally had enough. This pump exceeded my expectations and works flawlessly. It sat on my counter for a few weeks until I finally decided to install it. Installation time was less than 30 min. It took me longer to get the junk out from beneath the far sink than it did to install. The instructions are straight forward and easy to understand. I did the under the sink valve first. They supply you with all the right hoses and connections. I did have to get long hoses, but that is not the fault of the mfg. My supply pipes are further apart. I bought longer hoses and everything was golden.
IvyIsabel IvyIsabel
Awesome Once Installed and Running
Hired a plumber to install. Seemed to work immediately after installation but stopped recirculating later that day. Pump was running just fine, but no hot water! Watts Tech Support is only so-so and that took it from 5 Star down to Four. Took forever to get anyone on the phone. They suggested removing the 'Heat Traps' from my water heater. I had the plumber come back. He just chuckled and moved the pump from the hot water side of the water heater to the cold water side. Works perfectly now. This could be a do-it-yourself install if you are still young enough to work under a sink. I'm not! Finally got the whole-house connected, took a total of three cross-flow valves under three different sinks to get it completely going. Villan was an R/O System under the kitchen sink. One plumber would not install the cross-flow valve because of the R/O plumbing. Finally got a competent plumber to do the install and it works great.
JuniperJill JuniperJill
What a difference in a big home!
I can honestly say this is probably the most cost effective way of getting hot water to far places in a home, Our home 12 years old is roughly 3000 sq ft 2 story with 4 full baths with the master being at the most furthest point of the home upstairs roughly 100+ feet away from the hot water tank in the garage between the master bath sinks, jetted tub and shower I would have to wait almost 4 minutes of water running before it got warm then cold. The water lines used throughout the home are PEX non metallic plumbing. The pump and sensor unit are very easy to install on your own with a bit of common sense and took me about 40 minutes to install. I let the pump do it's thing for about 30 minutes went up to the 2nd sink in the master bath, which is the last and furthest in the home only 3 feet further than the 2nd sink, within approx 3 secs the water was warm to the touch followed by hotter water very shortly thereafter. I had my wife verify this later that evening, we would usually waste a bunch of water filling up the jetted tub or turning on the shower waiting on hot water, again within seconds the water was warm then hot!
KeystoneKathy KeystoneKathy
This is excellent for circulating hot water
It used to take about five minutes of running the water in the bathroom to get hot water. After installing this circulating pump I get hot water in about 30 seconds. It is also extremely easy to install.
LavaLou LavaLou
Solid built and well worth it
I watched videos of the installation and had a handyman friend help me. It was more of an ordeal than I had bargained, because the flexible piping on the hot water heater had to be re-shaped to acommadate the unit. Then when I turned the water back on, my kitchen faucet head was blocked - more fun.
MountainMike MountainMike
Very duraable programmable recurculation pump.
Almost everything about this little recirculation pump I like. Comes with a long cord, I think 8 feet, and has a clock face which allows turning on and off the pump in 15 minute intervals. I have mine installed above the hot water outlet of the water heater and plug the power cord into the same outlet that the washer and dryer are plugged into. Clock must be synchronized with actual time, then one can turn the pump on or off, depending on location of little tabs located around the face. These little tabs are somewhat awkward to work and appear to be easy to break. My pump has been working for about 3 plus years. By the way, mine is usually off at night, and is programmed on for 15 minutes every hour thru the day. I live in So. Cal. For some people, it could be left off thru much of the summer. I use thermostatically controlled devices which allows the water to flow in the cold water lines during cold times. They are separate, but very important for the system to work correctly.
NeonNancy NeonNancy
Great investment. Read the manual for DIY
Over 2 months of use, I will say this is one of the best investments I have made to my plumbing system. After installation, there was vibration and slight leak at the heater connector/terminals. I followed the air flush steps in the manual to resolve the issue. So, it is very important to read the accompanying manual during your install.
OrangeOscar OrangeOscar
Instahot
everything i needed to install was in the box

Quien compró este articulo también compró

Quien vio este articulo también también vio

Consejos e inspiración