Customer Reviews for VEVOR 30" Clamp on Pallet Forks, 1500 Lbs Tractor Bucket Forks with Adjustable Stabilizer Bar, Heavy Duty Pallet Forks for Tractor Attachments, Skid Steer, Loader Bucket, 43" Total Length

Great investment, protects what ever you don't want hot sparks or hot steel dripping on, completely protects anything your welding or cutting on, highly recommend.

Work great wish I had ordered the longer ones we put them on the bucket of the Kabota tractor but you can’t see them from the seat so if you go to get a set, do yourself a favor and buy the longer ones and get the center support brace it’s a must have.

Great item and seller

The clamp on forks are adequate, definitely need to secure to the bucket with the slots for chains,for more stability because the clamp downs loosen with each lift.

I bought these until I can afford a proper set of forks to attach to my tractor bucket. So far so good. I would recommend these for lighter loads for sure.

Bought these for odd jobs here at the farm. When they arrived, FedEx wasn't gentile with the box. It was torn but not too bad. Thankfully, all of the pieces were there. I was surprised to see the quality of steel and the welds. They will last me a lifetime as long as I don't get too zealous with lifting things up. My tractor a Long 2460 that will lift about 2600# with the bucket. These should hold up nicely. I would want the forks to bend before the bucket lip. The powder coating is nice as well. My only complaint is with the hold down mechanism. The bar used to tighten the forks down with is too short as you really need a short cheater bar to get them nice and snug on the bucket lip. They need to be taller to clear the top of the fork bracket when you use the cheater bar. The part of the tightening bar is threaded and has a nut to create the pressure. The nut is held on the tightening gar by red loctite. After a few times, the loctite broke free. The nut does not stay on the bar anymore. I am going to drill a hole through the nut onto the threaded bar. Then put a pin through both to keep the nut from turning freely. Other than these few things, these forks rock. I tell everybody about these.

These went on easily and worked great. I have a bolt on edge on my bucket and had to make a simple spacer for under the bucket behind the cutting edge so it fit flush.

I bought these so I could easily move some logs with my small tractor. They're heavy duty and I was able to lift and move large logs better than expected. I'd have to say I abused them beyond their capacity but for the most part they held out. The bracket that holds them together isn't very heavy duty and was held on by thumbscrews which is probably fine for lighter use but kept coming loose and falling off moving logs around. I took them to a local welder and had them weld a piece of angle iron so the stay put. The clamps to hold the forks also kept loosening but again I was really beating them up moving heavy logs. I plan to purchase another pair and weld them in the set so I can use it to move the dead falls on my property easily. If you're just looking for light duty pallet forks these are great. If you plan on doing heavier work I suggest you beef them up like I did. Can't go wrong for the price either way.

Items exactly as described. I have used each of these items, and the all perform, as I expected. I will do business again.

These came in handy when we had material delivered to the farm. They will tend to losen after some use so keep a rubber mallet close by to tighten them back. The brace is great for setting the width, but I found it takes away from the depth when picking up pallets. I'm pleased with them for the occasional use.