Customer Reviews for VEVOR High Pressure Hand Pump 3 Stage Airgun PCP Pump 4500PSI Stirrup Pump Air Rifle Filling Stirrup Pump(30MPA)

One of the best high pressure air pump for airguns that I've ever used

These pumps require a lot of work. They require significant downward pressure to pump and they pressurize in very small increments. To fill my pcp rifle you are talking 40 to 50 pumps which is like doing 40 or 50 deep knee bends. Seems like they could engineer a more efficient pump. Overall good quality pump with some nice design features like the flip down feet and quick attach hose. Mine had a leak at the quick connect fitting so I returned it to amazon and decided to purchase an electric compressor. Being over 6'2" I also found the pump to be a bit short for me. If it was taller it would move more air and would have been easier for me to use.

This is a good product. It works well and is sturdy. Definitely recommend it

Very good hand pump but before use you need to tighten all of fittings. Use it for my Challenger.30 If you have some PCP stuff and need to do some physical exercises: It’s for you.

This pump works great and far cheaper than the name brands. I use this pump with my PCP guns. So far it has not failed. I am happy with my purchase.

Was pumping up the tank for like 30 minutes until realizing the fitting on the hose from factor has a slow hiss. wasted so much time on that one. One reviewer returned theirs as it was a lot of work. That is SO TRUE. To get a small tank up to 200 bars, that was around 300ish pumps. Had to stop and take a break every 20 bars. From 200+, its about 5 pumps for 2 bars, 50 for 20. And on the down stroke, you need to really lean into the handle with all your weight. If you are under 200#, this will be a struggle for ya. I gave up at 260 bars. was too painful for the paws. Started looking into ordering an electric pump. This guy will be a good backup but seriously! way strenuous!!

Awesome pump would buy again

Very simple to put together that was one loose fitting took a while to figure it out but works just fine

the manual is so sooo bad written in chinglish. normally its funny but not a problem this one i have no idea what parts they are referring to and what they are trying to say.if you have leaks you can add teflon tape or slightly snug down but do not over tighten. the parts have a rubber seal in side that will compress and block the air way if you tighten too much

This is a nicely made pump, inflates to 3500 psi no problem as long as you use full strokes and don't pump more than 5 mins at a time so it doesn't overheat the o-rings. Pump is made in China. Pressure gauge has a glow in the dark face, says its made in Japan but doesn't really look like it is top quality. Overall very pleased with this pump. Better quality than I expected for the price.