Customer Reviews for VEVOR Fluid Extractor, 1.74 Gallons (6.5 Liters), Pneumatic/Manual Oil Changer Vacuum Fluid Extractor with Dipstick and Suction Hose, Oil Extractor Change Pump for Automotive Fluids Vacuum Evacuation

Recently bought a 2004 Mercedes CLK 500 Convertible and didn't want to be laying on the floor draining the engine oil. Bought this fluid extractor and used it to drain the oil through the dip stick tube. Worked great with my air compressor! Don't use too much air pressure or the extractor will start to collapse. There is a small valve on the extractor you can use to adjust the air pressure. Since the oil filter is changed from above, I was able to do the entire oil change standing in front of the car. Don't need to worry about the drain plug, crush washer, etc. I'll be using this on all my various engines going forward.

Arrived as expected. Works great. Had to have this for our Audi to change oil

I was so impressed with the product, I couldn't be happier¡! Super easy to use, clean, and store. A perfect addition to the garage and tools!!

Works well. Easy to setup. Great for filling modern transmissions. All the accessories that come with it make it even more useful.

The pressure bleeder works great, much easier than the classic method of having someone pump the brakes. This one is well constructed with thick plastic. Feels very solid. The inclusion of the wrench for the filler cap is a nice touch. It only comes with one adapter, but a universal adapter kit worked just fine.

Used the pressure pump to change fluid in my VW transmission. The correct adapter to fit the drain size and several others were included. Pump worked well and between the included directions and a couple of YouTube videos it was relatively easy to get the job done.

Seller did include the wrong tracking number for the item but once he sent me the correct tracking number then I could see the correct status of the shipment. Item did come new as described.

With air compressor hooked up it made short work of oil change in my a6. Various extr hoses allows for many applications. I can still use pump handle but air pressure is so much easier

no comment , writing review so hopefully I'll stop receiving emails asking for a review. no comment , writing review so hopefully I'll stop receiving emails asking for a review. no comment , writing review so hopefully I'll stop receiving emails asking for a review.no comment , writing review so hopefully I'll stop receiving emails asking for a review.no comment , writing review so hopefully I'll stop receiving emails asking for a review.

I have an Audi 3.0 V6 and it's designed to have the oil extracted rather than drained. To drain the oil they made it as difficult as they could. You have to have a triple square socket, Phillips screwdriver, and a Torx just to remove all the fasteners from the bottom panel to access the drain plug. Then you need an Allen wrench to remove the drain plug. With this product I was able to easily stick the straw tube down the dip stick tube and fairly quickly extract all the oil (7 quarts) from the engine in less than 5 minutes without dripping any oil on the floor or myself. No jacking up the car and crawling under the car since my oil filter is also on top of the engine. Oil changes are done in a 1/4th of the time. The vacuum pump is very effective and easy to use, if my air hose isn't handy to use the air vacuum pump I don't bother and I just use the hand pump.