Customer Reviews for VEVOR Grease Gun Coupler 2 PCS, 10000 PSI High Pressure, 6-Jaw Locking, Quick Release Grease Gun Tip with Hose/Zerk Fittings Cleaner, Compatible with All Grease Guns 1/8" NPT Fittings for Automobiles

Got these to replace the hose and fitting on my grease gun. Very good set...better then what i had on my current grease gun. Swapped out easily and screwed right one. snaps on to fitting very firmly with no seepage on the fittings. hose is pretty thick but still flexible.

I had bought a Quicksliver OEM grease gun with the grease and it was a pain and it leaked grease! I installed this thing on the same grease gun and it really does a great job of locking onto the nipple. Way easier than trying to just hold it on with one hand

I especially liked the ease and simplicity of the release mechanism for the 3-jaw lock. The strain relief is a great idea since the hose at the gun end in my experience is always the vulnerable and weak area of the hose. Accessories: The extension needles work nicely and certainly extend the capability of this gun. The leak-proof grease cap is a plus too as you know how you always have that messy end will always find its way to anything you want to keep clean or even keep dirt away from the grease end. The fitting cleaner is an awesome idea and works well; one quick wipe after using the cleaner and you're ready to administer a non-contaminated grease job. Well-built and heavy duty so I'm sure I'll get many years of use out of it. I would purchase again.

When I ordered this set I did not pay close attention to the description or to the photos. I thought that what I was getting was two heads and two hoses. This was so much more! It came with multiple other attachments for getting into really inaccessible areas that you would never access without these skinny attachments. \"Lifetime Lubricated\" CV-joints have always been a problem for me, sure the grease lasts the lifetime of the joint, because when the grease dribbles out over the years, then the \"Lifetime\" of the joint has just expired. Very clever wording. Now, with the needle tips supplied with this kit, you can inject some grease back into the CV joint and get several more years out of it. I had no idea what the red plastic items were when I opened the box. I had to go back and look at the Amazon page. They are for cleaning around Zerk fittings. Can't wait to try that out!

This tool is simple and very heavily constructed. The body is considerably larger in diameter than the more complicated six jaw tool I currently use. No gear drive on this one. Just a simple lever to directly compress the spring. This one securely and instantly latches to both sizes of fittings on my machines.  The protective cap for the nozzle is great. I've owned grease guns for more than 50 years and I've never seen one that has a cap that keeps the grease from leaking out and prevents all types of crud from getting in. What a great idea.  The included hoses are improved too. Great connections with the coil spring protection on the business end. Another great idea. And then there are the fitting cleaner. I haven't tried this yet but I can see how this gizmo may rescue a hopelessly gummed up fitting if you can get it on the fitting while powered by a drill. Yet another great idea. I'm very pleased with this kit and highly recommend it.

The locking coupler locks on nice and solid and is easily actuated. It should be noted that the coupler is quite long compared to some others and needs to move in a way that makes the unit longer to attach and detach so maybe not the best design for some tight places. Hoses are very flexible, time will tell on their durability. The real plus to this kit in my eye is the needle accesories and especially the small cleaning tool that can clean old gunk off and press on the check ball easily to exercise it.

Grease gun coupler set with hoses and 2 sizes of needles. Sturdy. I'm not very mechanically inclined but my fiance told me I did good getting this set! As per the listing description and a good value for the price!

This is a heavy-duty hose and coupler for any standard grease gun. I like the locking mechanism on this coupler. I have had trouble in the past having the coupler disconnect and grease squirting all over the place. This coupler locks on so that won't happen. I got the kit with one coupler and hose, and two different needle fittings that connect onto the coupler. Not only can it inject grease into a zerk that you cannot get the coupler attached, but you can also use the needles to inject grease into crevices or other areas where you can't fit the coupler or there is no zerk, like door hinges, bearings, gears, rack and pinion, etc. The included zerk cleaner is a nice extra. You can run it with a hex bit in a drill, or just turn it manually on the zerk to clean the hole and outside of the fitting. What I would like with this kit though is a small bag that attaches to the hose to hold the needles and cleaner accessories. That would keep them handy where and when you need them.

This kit comes with two flexible grease gun coupler/hoses. It also comes with four needle grease injectors and two grease fitting cleaners. The couplers are heavy duty easy on easy off couplers with three jaws. The locking action is very firm and will not easily pop off. Each coupler comes with a black rubber dust cap and is mounted to a black flexible high pressure hose good up to 10,000 psi. The coupler will fit on all 1/8\" NPT grease guns. There are two coarse and two fine needle injectors. The red fitting cleaners mount to a drill chuck (not included) and then you simply snap the cleaner onto the dirty grease fitting and spin it. It cleans off the dirt and muck in no time. Would recommend this to anyone.