Kit arrived and was easy to get together. Some of the screws were a little tough to get in, but, I think that means it will hold together pretty well. The metal tubes fit in rather snug and it was difficult to adjust. But, I managed to get it to work with a rubber jar opener to get a better grip when needed. I originally thought this would work well for moving large plants around. It really would if you had a piece of plywood to put on top. With the smaller wheels, it works best over smooth surfaces. It won’t work very well over bumpy ground like asphalt and gravel is likely a no-go. While my initial project didn’t quite turn out how I thought, I came up with an alternative use for this. First, I actually needed this a bit bigger than the max size. Since I didn’t have any metal tubing handy, I made the pieces extendable by using a table saw to cut wood to exactly the same size as the metal tubing. This allowed me to swap out the metal on two sides with wood. Worked perfect! I managed to get the dimensions to about 32” by 30” and I think the wood ended up even a little stronger. I used this new rolling dolly and put the table saw right on it. Now I can roll the table saw out of the garage easily. This was way cheaper than getting a new one that already had wheels. Plus it only raised the table saw by about 4” so it didn’t interfere with cutting or safety. The locking wheels and the stabilizing feet keep it from moving as well. Overall, I think it’s a nice product. I wish the metal tubing was both a little thicker and longer. It would make it more versatile and stronger for a minimal cost. It definitely is more than just an appliance dolly. I also wish the stabilizing feet went up a little higher. They tend to unscrew and drag on the ground a little too easily. But I still think it is very helpful and versatile for a variety of uses.
Lewis P 
