Download VEVOR App 
Exclusive $5.00 off for your first three orders on the App.
Scan the QR code to download
A backwash hose is an essential tool for each pool owner's maintenance kit. This hose removes dirt and debris from the pool filter to keep it cleaning the water. The backwash hose flushes out the dirt and filth accumulated in the pool filter.
Experience hassle-free pool care of the future with VEVOR's clever Backwash Hose. It combines innovation and simplicity to produce crystal-clear waters with little work.
The phrase "backwashing" refers to a technique for cleaning your filter that involves turning around the direction that water flows through it.
Larger particles eventually accumulate in the filter, even though most pool filters work to remove organic matter by forcing water via a porous medium, usually sand, and then replenishing the pool with clean water.
An increase in pressure may damage your filter or possibly lower its effectiveness. How often you backwash your swimming pool is mostly determined by its use, the kind of filtration system it has, and its location.
If bushes or trees border your pool, it will require more frequent backwashing than one that isn't exposed to leaf litter and organic material.
Ideally, backwashing your pool should be done every week or in conjunction with your planned maintenance. According to another industry standard, you should backwash when the pressure gauge on your filter reads 8–10 PSI above the initial level or "clean" pressure.
For instance, you should backwash your filter if it usually operates at 15 PSI but jumps to 25 PST. You ought to think about backwashing following a significant storm or an algal bloom in your region.
If deciduous trees are near, schedule a backwash after all the foliage has fallen. Your diatomaceous earth filter system needs to be disassembled and cleaned at least six times a year. A sand filter can be backwashed monthly and replaced twice a year.
After learning the significance of backwashing, let's examine attaching a backwash hose to a swimming pool. These simple methods can help you quickly get your pool back to its peak condition.
This is a crucial safety precaution because you don't want the pump to activate while you're working on the backwash hose. After shutting off the valve that regulates the pump's water flow, disconnect the pump from the power outlet.
When the power has been turned off, remove the filter's cap. Find the filter's backwash valve and set it to the "backwash" position. This will release any potential pressure buildup in the filter.
After that is finished, connect the filter to the backwash pipe. A connection on the backwash hose needs to be fastened to the filter's side output. Once the coupler is snug, tighten it. Don't over-tighten it, as this could harm the filter or the backwash hose.
Now that you've turned on the water supply, it's time to backwash the pool. First, open the valve that directs water flow to the pool pump.
Next, open the backwash valve on the filter, forcing water to exit the pool through the backwash hose. Run the water for a few minutes until the water from the backwash hose is clear.
When you backwash your filter, debris, leaves, and chemicals you don't want in your pool are removed. Where are you going to dump this water, then?
You still don't want the water to seep into your yard or flowerbeds, even though this wouldn't necessarily be bad for the environment.
Additionally, if you empty the dirty backwash water from your above-ground pool directly into your yard, your foundation may sink.
Connecting a hose to a low area in your yard where the water will drain away is the easiest approach to get rid of the dirty water. If your hose isn't long enough to reach the target spot, you can also use a sump pump to remove the water.
If you live in a neighborhood with plenty of trees, consider putting the hose into a drainage system. This will help prevent floods by keeping contaminated water away from your house and yard.
Please check with your local government to see if this is permitted in your community. It is not your intention to accidentally breach any laws.
Above all, never empty your backwash water into an untreated natural water body. This could damage the surrounding ecology and taint the water.
Regarding pool cleaning, VEVOR Backwash Hoses are unique because they are incredibly durable and effective. These hoses are made of premium PVC and resistant to chemicals and weathering, so they will survive numerous cleaning sessions.
Their adaptability makes handling and storing them simple, streamlining an otherwise difficult operation. With most pool filter systems, each hose is made to fit perfectly, creating a tight seal that stops leaks.
Pool owners can maintain their pools spotless and ready for extended summer enjoyment with VEVOR Backwash Hoses, which provide a rapid and efficient backwashing process.
The output size of the backwash port on your pool filter should match the length of the backwash hose. Two and one-half inches in diameter are typical sizes. Ensure the hose diameter fits its specifications to get the best performance out of your filter.
After each use, wash the hose with fresh water to remove any leftover chemicals or dirt. To stop deterioration, drain it completely, coil it loosely, and keep it somewhere cold and dry that isn't exposed to the sun.
Select a length, usually between 25 and 100 feet, that will enable you to effortlessly direct the water released to the region you selected for drainage. Consider the distance between your pool filter and the desired water discharge location.
