Updated Version
25 mm
Cut and bend the steel rods and bars quickly with this hydraulic rebar bender. In 6 to 7 seconds, it bends metal bars ranging from a quarter to an inch thick. It also bends the bars from 0° to 180° degrees in seconds. For cutting the bars, this bending machine takes 5 to 6 seconds. Featuring a maximum 1.57-inch bending radius, this bender works best with metal bars that have a hardness level of HRC30.
You don’t need to be an expert to use this electric rebar bender. By following a few suggestions, you can efficiently use it. First, place the hydraulic rebar bender on a stable and level surface so it won’t tip over during operation. Next, ensure that the machine is properly connected to a power source and has sufficient hydraulic fluid.
Afterward, wear all safety gear, like gloves for your protection. Now, it’s time to measure and mark the rebar according to your bending requirements. You may use a measuring tape or a marker for this purpose. Also, ensure that rebar is clean from the debris so nothing can interfere with the bending process.
Now, position the rebar around the machine roller and set the bending level using the angles featured on the bender machine. In the last stage, press the foot pedal so it can operate and get your job done.
You know a hydraulic rebar bender needs to deal with hardened material. So, it must be equipped with powerful motors. A high-quality motor not only ensures longevity and durability but it also proves less prone to overheating and wear. It also maintains a consistent bending performance. And if a sopper coil motor is equipped with an anti-noise mechanism, it avoids making noise. As a result, you’ll be able to work efficiently with full comfort.
This electric rebar bender has a 1700W pure copper coil motor. It also doesn’t make noise, so you can work with full efficiency. No matter how hard the steel rods or bars are, the premium motor enables the bender machine to work swiftly and bend or cut them in seconds. This approach saves you time and consumes less electricity, saving you money.
So, if you’re looking for a rebar bender machine equipped with an advanced mechanism, the VEVOR rebar machine is what you need. So, simply opt for it and do all of your rebar bending and cutting tasks effortlessly.
Feel free to use this steel bar bender for different metal bars, such as rebar, steel rods, low-carbon steel, medium-carbon steel, and round steel. It is also super useful in all sorts of construction projects, like building bridges, highways, or power plants. In short, this rebar bender is perfect for bending and shaping metal bars to fit the needs of construction work, like bridge construction, railway viaducts, highway bridges, etc.
If a rebar bender and cutter is made of premium quality material, it will withstand the rigours of heavy-duty usage over an extended period. Moreover, high-quality bending rebar keeps operating without requiring repair or replacement, saving you time and time.
Also, when a rebar bender keeps working smoothly, it enhances productivity. As a result, you can accomplish much work in a short time. So, are you looking for such a rebar steel bender and cutter machine? If your answer is yes, a VEVOR hydraulic bender is what you need.
It is made of a strong iron body and idler wheels, Ø78 iron gyre idler wheel and Ø94 fixed idle. No matter how much and long you use this hydraulic rebar bender, it will remain intact and doesn’t require repair. So, stop struggling with manual rebar bending today and grab your hydraulic rebar bender now!