VEVOR Metal Lathe 8.7 x 23.6 Inch/220 x 600MM Mini Metal Lathe 1.1KW Infinitely Variable Speed Mini Lathe Machine LED Screen for Counter Face Turning Driling

I like, very nice lathe. Arrive soon and was good Price. It was My Christmas present. Very easy to make working.

This was hit and miss - but the basic casting is actually quite good so the issues will be fixable. The first thing was to remove the chuck, and then I discovered a lot of surface rust on the spindle. So I tore the whole thing down to clean it and found that there was paint on the spindle inside the headstock and even paint on the bearings and the bearing surfaces. The saddle is a poor fit as well, it can rotate ever so slightly on the ways so need to look into that. Weight is also an issue - it was supposed to be 80+ kg, but according to the shipment company it is 60 kg. Since I could easily lift it I am more inclined to believe the 60 kg figure, so 20+ kg of rigidity is missing. But I am happy anyways because the ways are good, so this will turn out well in the ens.

Fast delivery, great contact with the seller. The quality corresponds to the price. All ok! I recommend

Mx 600 cena výkon super, je potřeba nějaké věci doladit,chvíli to trvá, doporucuji zkontrolovat přídavnou převodovku potřeboval jsem náhradní ozubené kolo, podpora reagovala dobře a díl zaslali, rychlá doba dodání, bezproblémový servis, používám již několik měsíců, za tuto cenu super, jiné dražší výrobky jsou také potřeba doladit, koupil bych znovu

I use it few days, is good machine for the money and the accessories is in the package as they says.

I got this and have been cleaning the grease off. For one that really helps you learn your machine.Things I have noticed on this mini lathe versus others on the market and their common issues:1) Spindle bearings are decent from the factory. I hear they die quickly, so I'll have to report back in a few months of use to see how they are. However, the chuck and spindle itself have a runout of +/- 0.0005". That's pretty good all things considered!2) Shipping for this specific product was great! It was bolted down to 2 blocks and had a box built around it with foam padding on either end, wrapped in a bag. Plenty of grease which may leave your ways stained a bit, but its only aesthetic and not dimensional.3) The ways are great! I've only gotten readings of <= +/- 0.0005" maximum at any point using a dial test indicator off the carriage.4) Simple construction. It is easy to disassemble and clean. The back gears and inside the electrical housing area is not covered with grease which saves cleaning in a tight space. All of the components past the headstock are greased/waxed pretty heavily, though.5) Lead screw is firmly mounted and the apron has an adjustable gib strip to move the half nut up and down if you need to modify it. This is great because it will save you from modding the apron or shimming it to avoid lead screw flex. Mine has no flex when engaging properly.6) Tailstock lock has a lever and is very easy to use. Adjustable pre-load for how sensitive you want the lock lever travel to be.7) Graduation dials can be set like a normal lathe.8) Higher RPM than other mini lathes9) All metal change gears, although there are fewer of them. There is a set for $100 more here on Amazon as well for more sizes of gears that I will probably be buying.10) Can run without the gear cover! This is great if you have any modifications that disallow it closing. I plan on eventually 3D printing a gearbox to test with this lathe and eventually machining one from metal on the lathe itsel

First, the tool holder base came in pink. Why would you paint this pink I_ going to feature this lathe in online videos so I now need to strip off and repaint this damn pink paint. It_ a good starter lathe as long as you know you will have to spend a lot of time tinkering with it to get it running. A lot of time needs to be spent deburing the metal parts and getting the metal shavings and grinding grit out of it. I needed to air hammer out a casting defect to properly tighten a mounting bolt.

Tornio ottimo ..venditore molto disponibile tt ok

Non malvagio, uso obbistico senza grosse pretese

El producto esta muy bien acabado, vino muy bien embalado. Pese a ser un producto casi hobbie no tiene holguras en los carros ni en los husillos. No tiene vibraciones el sistema de avance funciona bastante bien y las palancas selectoras funcionan adecuadamente.La _ica pega es el manual de usuario aunque bastante completo, fotos muy recopiadas y poca nitidez. Alguna foto no se corresponde con el torno, aunque es una cosa menor. No detalla como girar el carro charriot pero el vendedor con prontitud lo respondio. Hay que correr el charriot todo a la derecha y aparecen 2 tornillos allen escondidos debajo de el. Estoy a la espera de listado de partes de repuesto. La correa de trasmisi_ es 5M375 dato aportado por el vendedor.Lo mejor el vendedor responde a las preguntas con prontitud. Y cumple lo que ofrece.Las lunetas q aparecen en la foto no vienen incluidas en el producto.