VEVOR 50Amp Non-Touch Pilot Arc Plasma Cutter, 110/220V Dual Voltage Plasma Cutting Machine, Max 1/2 Inch(14MM) Clean Cut, Portable Cutting Machine IGBT Inverter Digital Plasma Cutting Equipment

After using mine bought another for a friend's home shop. He was surprised at the quality cuts for a reasonably priced machine.

I haven't used but a couple times but has come in handy. A friend who welds and fabs stuff at home had me buy one for his home shop after using mine.

This machine works awesome for the money it's the best deal going don't let the price fool you it works as good as the thousand dollar plasma cutter

works ok so far torch heads Pilot Arc does not always work, but when it does it cuts clean. time will tell how it will hold up. just using around house for small repairs and hobbies. hose clamps that come with it are junk, some screws in case are stripped out, water separator / regulator is cheaply made but it works as should. if you buy this go buy good hose clamps and water separator / regulator as well. it is wired for 110 and does not include adapter for 220.

as of now it is working as intended, will have to see on LongGevity.i called Mophorn and they responded in a timely manor. I love this plasma cutter.

Cut 1/2 steel no better or worse then the thermal dynamic plasmas I’ve used in the past. Very impressed for the money I spent. Buy extra tips, cones, and cups.

I assembled the cut-50f unit. I plugged the unit into a standard 20amp 110v outlet and attached my air hose. I then attached the ground to the metal I was going to cut. I turned the power on and it immediately made a popping sound from in side the case, then blows breaker. Then a burnt smell came from the unit.I sent in a request on what to do. I will change my rating once my unit is fixed.Nov. 7 2019 Updated response from seller:They wanted me to recreate on video their machine causing a electrical short and smoking. "Please put your life and your property in danger on video so we can send it to the manufacture." This what they asked me to do.I am so far very concerned with how they are handling a defective product that they sold.This was my response:"I will not try to recreate what happened with videos, it may catch on fire or cause injury.Plesse send a replacement unit and a postage paid return shipping label for the defective unit.If you can not send a working unit, email me a postage paid return shipping label and I will return unit for a full refund.It surprises me that you would require your customers to take such dangerous actions that could possible could cause a fire, bodly injury or death.Thanks for your quick response to this matter."I will update once I hear back.Nov 9th, 2019 Update:They are sending me a new Cut-50F plasma cutter. I will update my review and star rating once I have had a chance to use the new unit.Nov 14th update:After a little back and forth with the seller, they did send me a new unit and it so far has worked as expected.

It's lightweight and portable. I had to adjust the air pressure and cutting amps from the factory settings. I don't like that it's wired for 110v. It blew a fuse the second time I used it. It may be a little small for thicker metal cutting.

This little box will cut through almost anything that's less than 1/2" easily, too easy! Cutting 1/2" mild steel requires a steady hand. It will do it ,just go slow and steady at 49 amps( that's the max on my machine). Buy it and build some stuff. I'm glad I purchased this cutter.

It took some tweaking to get it going but all is well.I could not figure out how to adjust the regulator though. You really have to pull up on the adjusting knob the first time to unlock it. You may even have to use pliers like I did.