Customer Reviews for VEVOR 15L Ultrasonic Cleaner with Digital Timer&Heater Professional Ultrasonic Cleaner 40kHz Advanced Ultrasonic Cleaner 110V for Wrench Screwdriver Repairing Tools Industrial Parts Mental Cleaning

did a great job on motorcycle carb.

For a sonic cleaner to work it needs time and heat. Set yourself up in a garrage, room, or porch and watch a movie while the sonic cleaner does its job. Break out the air hose from a compressor and blast away the left over grime. Micro fiber cloth and some oil, your gun will be screaming freedom on the next range day.

Easy to use and does the job

Great carburetor cleaner

I have been using the unit on a constant basis since I purchased it. It has been a remarkable timesaver for me in cleaning small parts and rescuing rusted hand tools from the dead.I still give this a five star, but the heating system is deficient. Fortunately this is compensated for when the ultrasound is activated, it actually heats the water better than the built in heating element due to the amout of ultrasound energy emmitted by the three transducers.For best results fill the tank with the hottest tap water you can get and place the parts and cleaning solution in a ziplock bag for immersion in the hot water (avoids cleanup from contaminating the machine itself with potentially corrosive liquids like vinegar for rust removal).

It works good

Works as intended. I'm glad I purchased it,

I got the 6 liter one, really seems to work fine heats up the water about 2 degrees a minute, so not very fast but it gets there. No leaks noted. All works as it should.

I bought this to clean small parts, springs, etc when I clean gun parts and small engine/carburetor parts for my car projects. I put the parts in a small ziplock bag and fill the bag with 1 part cleaner (Simple Green Extreme Aircraft parts cleaner) and 3 parts water. Seal and place the bag in the basket and then fill the parts cleaner up to within about an inch of the top. I set the water temperature to 50C and the timer for 20 minutes. When I'm done, I simply rinse the parts off, and reassemble. For jewelry, I use a couple of drops of dish soap in the bag with the water and follow the same procedure (minus the oiling and reassembling at the end). Great product! I've been using it for about a month now with fantastic results. This saves me from using a lot of solvents and is a lot more environmentally friendly.

There`s nothing to dislike