Customer Reviews for VEVOR Paint Tank 10L Pressure Pot Paint Sprayer 2.5 Gallon Pressure Spray Gun Regulator (10L 1.5mm)

This arrived 3 days ago, sooner than expected. Immediately took it out of the shipping container, which was the most difficult part. Container was will made to protect the tank. Took off the lid to remove the pickup tube. Other reported problems doing this, mine came out with a pair of locking plier and very little effort. Cleaned up the sealant, installed the handle, made sure the valves were closed, backed off the regulator, and hooked to the air compressor. Opened the regulator to 50 PSI. Let it set for 2 days and was still at 50 PSI. Made my resin/wood bowl blank, inserted the table in the bottom of the tank and the mold. Set it to 50 PSI and this afternoon it is still at 50 PSI. Only negative is that when I removed the lid after the pressure test, some of the gasket pulled out keeping it from sealing. Pushed back in and it sealed. Simple solution is, check the gasket when you remove the lid. This should last a lifetime.

Using this sprayer for the first time,I encountered mechanical problems. The tip of the guy broke off. Is this part replaceable.

when I need to paint the house i need containers that hold the paint - plus i have to move the container - the kids disapear when there is work to do -when I was young and stupid I was only able to get 3 gal to hold paint, but now I can have more paint- it does go faster w/air blowing paint on - plus the equipment has all thats needed to give a decent coverage - I was the painter for a private school, and this equipment does great - the only reason I got the job is I could varnish the 15 - 18 inch single boards with out putting in bubbles

Great price, quick shipping, came in a study box for shipping that I repurposed, sturdy construction. I use it for a pressure tank for resin hardening and it works just fine.

The unit came fully assembled in a very heavy-duty box. I have used it several times with no leaks. The only change I made was to add a 90-degree fitting to the air intake tube inside the lid so the air does not blow the resin out of the mold when pressurizing the pot.

I was looking for something that I could use to paint both of my 16' garage doors and didn't want to roll or brush them. I looked and found this paint sprayer. Wow! Saved me time and effort. Was easy to adjust and sprayed on the doors evenly. Turned out looking great and with no brush or roller markings. Changed the color from a light color to a dark brown and only took one coat to cover. I did tape off the trim because it does have overspray but not a lot. Would definitely recommend for the ease of use and easy cleanup. Is quite durable as well.

I bought this specifically for the pressure pot for resin crafting custom tail lights. It is heavy duty, high quality and with a couple accessories like a pressure gauge and 3D printed feet for horizontal use, it was perfect for my application. I can't vouch for the sprayer itself as it is still in the box unused, but it seems to be of acceptable quality as well.

Very good and works well that's all I can say so if u in the market for anything like this tey this one

Great for what I needed! Exactly what it says it is. Extremely worth your money. I modified it to make a pressure pot for casting epoxy resin projects..

An excellent quality tool and very reasonable price. I have not used it yet but I have tested it .Thanks