Customer Reviews for VEVOR Hydraulic Puller 5T,Hydraulic Gear Puller,3 Jaw Puller Set,Hydraulic Bearing Puller 3 in 1,Three Arm Bearing Removal Cylinder Tool Kit

Worked well for what I was using it for. I put a lot of pressure on it everything held together. Happy with the product used it on two difficult projects with no issues. JJ

I do not write many reviews. I wish to report that I was concerned about quality when I ordered this item but, upon arrival, was pleasantly surprised by the high gauge of the puller tongs and supporting hardware. This device had no problem pulling the rear hubs from the splines on my Miata where a smaller puller had failed. The instructions are dismal -- written in poorly-translated English -- but its assembly and use is straightforward.

Could not get a bearing off with all of my pullers,tried heat everything. This worked easy to remove it. Great puller

I used this to remove timing gears off of a 1926 Fordson Tractor engine. I had tried a conventional puller (two jaw) and used heat, penetrating oil, brass hammer, etc. Nothing worked. Once I had this puller assembled and set up, the gears were removed in less than two minutes. I like that the jaws are reversible with hooked and square cut ends as well as the adjustment collar is designed to use two or all three jaws; this is very versitle, especially when space is limited on what you are working on. It is priced right for the home shop, hobby mechanic, etc. I don't know how often I'll use something like this tool, but, it saved me on one job and I am quite satisfied.

We could not use it with our car

I got for pulling propellers of a boat and worked great. The only downside is this thing is way bigger than I imagined so it’s not going to work and any small jobs.

Got stranded in a National Forest with a flat tire and a seazed rim on the truck. After feeding mosquitos for an hour and a half and only with the help of another driver who had two crowbar and penetrant oil were we able to get it off and install the spare. This puller will insure that never happens again!

I'm not here to talk about how much I hate a certain Chevy truck that's in my life. Or how it's not nearly old enough to be the miserable rust bucket that it is. Or how the lower ball joint has never been greased and needed to be replaced. I'm here to talk about the miserable rust-welded axle that wouldn't come out of the hub. That is until 15 tons of hydraulic force leveled the playing field with ease after nothing else worked. This tools is heavy, it's awkward, and it's absolutely worth buying if you have an application for it. Because if this is where you've ended up looking you're in a bad situation. This will fix it.

This puller just whipped those break disc's right off of my truck,before we hammered on them to no avail, but this puller took them right off.