Customer Reviews for VEVOR Heavy Duty Leveling Casters, Leveling Casters Stem, Set of 4, 2.5", Retractable Leveling Casters for Workbench, 4400lbs Max Loading Capacity, 360-degree Swivel Casters for Industry Equipment

Casters are HONESTLY heavy duty— not just a label. Would definitely recommend. Swivels and brakes are excellent. Wheels are better than on other casters I considered purchasing. Glad I went with these!

I installed them on a wooden workbench. The screw holes line up, meaning that after I drilled the holes I can rotate the unit and the hols still fit perfectly. I needed longer bolts for my application so be prepared to purchase additional hardware. The racheting mechanic to raise and lower the wheels works very well and smooth. I push the workbench around on uneven ground and the wheels did fine. As a suggestion for improvement, I think the wheels can be bigger so it can clear obstacles easier. And longer bolts would be nice too especially for 2x4 wood installation. Recommended.

Doesn’t ride smooth on uneven ground. Levelers do not clear ground. When levelers are in the up position they do not have enough clearance for uneven ground.

Baught these to go on my built shop table at home. Turned out great. These are strong and has good leveling.

Bought these for a workbench I made for my new garage. The floor slopes very slightly from back to front and from sides to center for draining. I had the casters on wheels and just moving the bench several inches in any of four directions the caster legs would lightly touch the floor, and I had to raise them so the wheels would roll. The legs tighten very securely if I want the bench to be steady and secure. It is easy to adjust the caster legs to compensate for the tiny variations in bench legs that are off the slightest length due to my amateur caprpenter skills.

These are a swell product,used to make 50ton shop press mobile.The new style ratchet works way easier than the older round dial ones.

Each caster has a range to level even the largest project.

Bought these casters to put under my metal lathe so I could level it and still move it when needed they work great on a lathe that weighs 710lbs

Good product and it is pretty user friendly. The item we used to convert from stationary to mobile was heavy, but these coasters made it manageable.

Used eight of these to support 16 foot workbench framed out with 4 x 4 and two by eights with a steel top.