Customer Reviews for Magnetic Drill 1450W 12800N Portable Mag Drill Press 800RPM

I bought the mag drill mainly to drill holes for a fixture table. I was very impressed with the quality of the tool especially at that price. I was not going to spend $600 for a name brand especially for the limited uses I planned for the drill. I drilled 50 3/4 inch holes without any problems. I did purchase another cutting bit because the included bits were metric. It took about 40 seconds for each hole in 1/2 mild steel. Very happy with my purchase

Just what I needed I’m tossing my corded drill , punches thru w ease spindle Speed is a little too fast but using a water antifreeze coolant works just great would recommend to all the hobbyists thanks Joe fav

Preformed greater then expected... Both safer and cleaner results in less time then doing it by hand... highly recommend

I have just used this once. Like how it extends up high enough for chuck usage. Used a drill bit. Worked great. Have not used it with the included (very sharp) cutters, as of yet. I like it.

Everyone needs one of these. Works great on everything i have used it on. Farming requires alot of unpleasant times to have to fix things but this mag drill is a must have

Man it was nice to drill a hole in no time and it was true to size the magnet works great the hole saws are sharp

Purchased to drill dog holes in a welding table top and to modify a gantry crane. Unit performed well overall and had several nice features. Pros: Outright purchase price was affordable and came with annular cutter set along with a chuck and adapter for twist drills. Equipped with a safety cut-out which prevents starting the spindle without the magnet engaged. Drill has variable seed and is reversible. Cons: Drill is equipped with the Nitto Kohki one-touch spindle and will not accept the standard Weldon shank tools.Cutters are metric and the (16mm-5/8) I needed is not included which required me to purchase a Nitto cutter at a cost of ~$75 from a local tool supplier. Vevor does not offer Nitto shanked tools. I have since purchased Euroboor Nitto-Weldon (~$75) adapter to use the more common and affordable Weldon shanked tools. There is significant run-out in the drill chuck but have not tried another chuck so cannot say if it or adapter is the cause. The thru-the-tool cutting fluid or coolant is a nice feature but does not deliver enough to be of good utility...applied cutting fluid manually. Overall: Tool is nicely outfitted, of decent quality and so far appears to be of value. I would suggest you purchase with you eyes open and depending on whether additional purchases are required, as in my case, other mag drills might be of better value and utility.

Well made. A little faster operating speed than I wanted (didn't pay attention when ordering - MY fault). Customer Service was helpful in resolving the issue. Liked that it came with the annular cutters. Was concerned that it would be a pain the use normal twist drill bits - until I figured out that you can adjust the position on the head on the slide. Power-in cord should be on the top of the body (like the power from the switches to the motor), cause it's going the get abused when wrestling it around when doing horizonal work. It is HEAVY when positioning for horizonal or upside-down work, you just need to be careful & or get help when doing so. Owners manual is "Spartin" in details of more than basic operation. Seems that there are NO Spare Parts available for this equipment. For the price, it's a deal - just hope it doesn't break something.

Work with it ones but did what it supposed to, very cheaply made unfortunately and this is my only concern about the product. Make weird noises right at firs start but did drill holes in a steel like in a butter. If it is not going to fall apart soon that will be great buy.

I bought this after struggling with a hand held drill to put 1/2" holes in a steel welding table. It was slow and ineffective. After buying the Vervor mag drill, I sunk the holes quickly, easily, and cleanly. It arrived promptly after ordering. The packing prevented from any damage to the drill during transit. I highly recommend (and have to my friends) this drill and the bits, which are good quality. If this one ever quits, I'm buying this again.