Customer Reviews for 2-in-1 Shrinker & Stretcher Set 2 Steel Jaws Sheet Metal Bender Manual Machine

I smoothed the friction points between the blocks and greased them before even trying it. The friction points need to move easily or the whole idea of operation goes out the window. Only played with it a little so far. Turned a 3”x7” piece of 20 gauge steel sheet into a potato chip.

Very nice condition

Great value! Both dies with one tool brings this tool within anyone's budget. M.E.

Husband was very happy with it. Did what it’s suppose to do

Got my shrinker / stretcher delivered 3 days after it was ordered, thank you Amazon.The tool works great on 0.040" aluminum colored sheeting. I built some door post and curved hood and fenders for my Dirt Modified Race car. I mounted the unit to my steel welding table using the threaded holes in the base. The jaws are kinda tough to swap out but not bad once the paint rubs down off the main housing.All in all, very happy with the construction, the fabricating ability, price and delivery time from Amazon.I highly recommend for the backyard fabricator.

I want to start off by saying this is a bit better built than I thought itd be. There are metal drive gears to drive the rollers (no idea if they are carbon steel or cast iron junk). The frame is not over engineered, but it is not under either. The rollers seem like the cheapest part of the machine, they are small and annoyingly knurled. The handle is crude and needed sharp edges ground off, but my real complaint here is it is too tight to the machine so you can't use it in a vise. I attempted to roll 3/8" round, but it was pretty clear that it was going to be a bad result so I stopped. If your goals are to work within the machines advertised limits, I think you'll be happy. It rolls 1/4" rd with ease. I do wish a larger version of this existed to roll 1/2", but this wasn't expected to be that machine. If your expectations are in check, this will be a good machine for you.

es una herramienta muy versatil y adecuada para los fines que ejecuto como es el bricolaje y mi pasion personal. me ayuda mucho en la creacion de figuras y demas formaciones en aceros de perfil.

Great product. Better quality and better price performance than any other product I researched. I would recommend to anyone looking for a similar product.

Got my shrinker / stretcher delivered 3 days after it was ordered, thank you Amazon.The tool works great on 0.040" aluminum colored sheeting. I built some door post and curved hood and fenders for my Dirt Modified Race car. I mounted the unit to my steel welding table using the threaded holes in the base. The jaws are kinda tough to swap out but not bad once the paint rubs down off the main housing.All in all, very happy with the construction, the fabricating ability, price and delivery time from Amazon.I highly recommend for the backyard fabricator.

Very nice condition