Customer Reviews for Rotary Table 4" 3-slot Horizontal Vertical Dividing Plates For Milling Machine

It is a nicely built machine. Just a warning: the problem with the one I got was that the worm gear ratio was 72:1, even though the accompanying manual identified it as a 90:1 (a more common ratio..) I ruined a piece while using the dividing plates before I realized this.

It works well. Functionally, it’s pretty great.It comes with some extras, but not much of an explanation. Because it can mount parallel or perpendicular, it lacks a way to clamp it to the table for parallel use. I had to machine a toe clamp to hold the other end. Thankfully, I have a mill. But, it’d have been so much easier to include one since it’s necessary.Otherwise, the 90 turns for 360 (1 for 4), works out pretty well for any angle divisible by four - 72, 60, 120, etc. I had to machine a way to attach my lathe chuck. Spent a half hour making the little piece I pictured… worked well for not using the dividing plates.Solid. Fairly precise. Works. But you’re going to have to make things to use it.

Rotary table seems to be very well built. There is a lot of oil on it and sharp edges that need softening but at this price point I have no complaints. I am a hobby machinist and this fits the bill perfectly. Amazingly, it only took 3 days to arrive. I couldn't be happier!

Remarkable rotary table /& that's prior to making any consideration of respective "value" (as you would with some equipment offered here). These rotary tables run in the $500 dollar range under many different names; & this model is Indistinguishable in tolerance & quality from any of those models. Thank you, Vevor

Nice product at a great price

I Needed a rotary table for a hobby shop project and after much research decided on the Rotary Table 6" 4-slot version. It arrived quickly and was well packaged, no damage upon removal. Cleaned all surfaces of the shipping grease/oil and checked operation. Turned nice and smooth and no obvious casting flaws or issues. Only minor thing I noted was the rotary handle had a little wobble to it during rotation. Took apart and reseated it and it was better. Overall it is a great value and excellent precision for my hobby shop. I can easily recommend it,

Love this table. Works great, well made

Overall great finish quality and performance. If you are rotating in one direction then it's fairly accurate for most general positioning work. I mounted a 4" 3 jaw chuck for small round parts needing flats and or needed drilling of holes at a given angle. It dose have about 2 degrees of backlash if you reverse the rotation direction.

A gift for my son. It works like a charm!