Customer Reviews for VEVOR SJ 300 Slip Roll Machine, Max 12inch/300mm Forming Width & 1mm Thickness Sheet Metal Roller, Manual Slip Roll with Crank Handle

After taking time to learn how to adjust and use the slip roll, i was able to roll sheet metal easily. I even used it to take out some creases in a piece i miss bent. Seems to work as it should. I feel it’sa great price on a quality tool.

Works great and is a initial pinch so you can flip flop the part and have no flat spots. Very happy using with light guages.

It was necessary to retap the adjustment threads.

I'm bending 16 gauge mild steel and it rolls nice. I've also done rod on it, with the side slots and it does a great job and cable of perfect circles. It's super manual with zero instructions. However, you can figure it out quite easily with scrap pieces. It came with broken front plastic handles, since the packaging was crap and didn't protect them enough. It's HEAVY so they prefer to not return ship it as broken, instead they refunded me to buy my own replacement handles. Annoying yes, however they provided enough refund for a couple pairs, even though they were tricky to find with zero specs, even after I asked for the specs. Regardless, it works without the handles really, the screws to adjust the rollers are smooth and easy to move. I think you get what you pay for, but overall I'm pleased because it gets the job done and seems solid and should last, regardless of the handle issue. Be aware the Vevor one is identical, I ordered this Mophorn roller, and the Vevor one was shipped to me and looks identical. In case someone is comparing, that might help with that question.

The directions consist of 2 pages one sided and include nothing about safety, maintenance, or operation. One is a blown up parts diagram and the other is just a picture of the slip roll. Upon inspection I found that when the rollers are all brought together there's a tight spot so one must be slightly out of round. I have not had a chance to see if I can compensate for it in some way. The packaging didn't seem to indicate it was damaged in shipping although the box was beaten up when it arrived. It did work for it's intended purpose as I was able to make 1 1/2" rolls for a project. I'll look deeper into it's operation later.

It worked for my job- rolls smoothy, and definitely built better than I expected.

Set up is easy

Item is as described. Just a little adjustment on the gears and it cranks perfectly. Easy to follow manual for adjustments. Packaged delivered to Hawaii in very good condition.

Amazing deal. Really. I couldn’t find another slip roll that could bend this gage for any cheaper. And besides that works like a dream. 5 starz!

The first roller I recieved was damaged in transit but the seller replaced it immediately.As for the slip roller, it does roll 16 gauge mild steel, slowly with many passes. It's really better suited for thinner material but it will work at the max rated capacity.Fit and finish is what you'd expect at this price point. The casings are rough and the paint is terrible. The bushings for the rollers clunk around in the casting.But I still give it 5 stars because this is what you should expect at this price. The Eastwood unit is virtually identical, made in China like this one, and twice the cost. I'd be extremely disappointed if i paid $500 for this quality.