Customer Reviews for VEVOR Z Rack, Industrial Grade Z Base Garment Rack, Height Adjustable Rolling Z Garment Rack, Sturdy Steel Z Base Clothing Rack w/Lockable Casters for Home Garment Store Display Commercial Use (Red)

This is a good rack, but does not seem as sturdy as the racks made by Econoco, which are a little more expensive.PROS:1. Well-made and strong.2. Less expensive than the heavier racks.3. Has a second bar so you can really hang a lot of clothes on it (if you have a lot of short items of clothes, like those for kids).4. Reasonably easy to assemble.CONS:1. It is not as strong as other racks. I would consider this a high-mid-grade rack.2. With both racks in place, it is quite high and becomes a little top-heavy. It is not as stable with both racks. With both racks installed, you can only put short clothes on the top rack anyway. Accordingly, I took the bottom rack out and moved the top rack down. It is a stronger rack and makes the entire product much more stable.

Large in size and with an industrial look, this garment rack rolls with ease and two of the swivel casters are locking so it can be secured in place but seems suited for light to moderate loads. Assembly isn’t too difficult but the completely visual half-sheet of instructions could definitely be improved. It is worth the time to watch the video on the product page. Note that both the top and lower hanging bar are created with two pieces that connect together so there is a seam in the middle of each bar.The top bar connects in the middle with screws but the lower hanging bar connects with just one spring loaded button. A one-piece bar is preferable because with a two-piece bar it is possible that a heavy load may cause those center seams to eventually sag, a compromise I assume was made to facilitate ease in transport. A smaller issue but the small connector pieces and tools tore through their zip lock bag during shipment and were rolling around loose in the box but luckily did not escape although there was a hole in the outer carton.All tools essential for assembly are included although I did need a rubber mallet for two areas that were difficult to fit together. Included is an Allen wrench to tighten the screws and an open-end wrench for the caster connectors. Most of the poles snap into place with spring loaded buttons connectors. Overall the rack is okay and may work well in a laundry room, craft room or for storing lightweight seasonal clothing.

This is larger than I expected. But that's not a bad thing. The only negative was putting it together. The instructions neglect to mention the screws. It mentions one, but there are more. You have to figure that out as you go along, and as it happens I used the wrong screw for the first thing and had to go back and redo that with another screw. Frustrating. It's not as sturdy in the middle of the racks as I'd have liked. For something called "profesisonal" I wouldn't expect a small amount of weight to make it bow. But it will work for my needs.

Can not be assembled with parts delivered!

Just what I needed to organize my gowns during prom season

I bought this for my daughters high school play. It was easy to assemble but was as sturdy as I hoped but for the price was a great deal

I've been looking for racks to use in my booth at vendor events that won't fall over when the wind blows and these are amazing! We used them over the weekend and they never moved

Just what I was looking for at a great price. It's a little wobbly in the standing poles but other than that it is very sturdy. Don't underestimate this zbar. It is currently holding 10-15 HEAVY wedding dresses & has not buckled under the weight. I was unsure of the size of it when it showed up due to the size of the box but it was exactly what I thought it was.

We have a small business that involves heavy sweatshirts. We had bought multiple $20-25 racks. Finally, I bought one of these! Why did we wait so long??? We aren’t afraid of the darn thing falling over, it’s sturdy, and the wheels work,!

Some of the Hardware was missing. 2 of the poles were starting to rust. I went to the local hardware store and picked up the needed bolts and a can of spray paint. I needed this rack asap and the only option it gave me was to return it.