Customer Reviews for VEVOR Cast Steel Anvil, 22 Lbs(10kg) Single Horn Anvil with Large Countertop and Stable Base, High Hardness Rugged Round Horn Anvil Blacksmith, for Bending, Shaping

Excellent value. Not a “perfect “ anvil, but fully functional and all working surfaces flawless. Pritchel hole is too large and in a bad position. I machined an adapter that works pretty well. Rebound is better than my old anvil but not as good as some. However rebound is related to hardness and too hard would make it prone to chipping. I’m happy with it.

Originally, I received the wrong item. My experience to return the wrong item was easy. This product was a great help for my grandson's early interest in blacksmithing.

I bought this anvil for two reasons. 1) It has an HRc hardness of ~55, instead of only ~50 which is what the blue ones are. 2) Because the picture shows the horn and round hole being flush with the flat surface of the top of the anvil. This second reason turned out not to be the case. There is about a 1/ to 3/8 inch step there. I have since learned that the step is useful for some things but it does mean the round hole is not the same height all the way round, which makes it less useful for using it as a Pritchard hole. I plan to weld some fender washers onto the end of a pipe that will fit in that hole, and then grind one side flat to fit in the hole and solve this problem. The anvil itself is quite good, and for the price is down right amazing. Edges are sharp, so you can break the corners with a file to set the corner radiuses at the size you want. The anvil rings a bit, but I think with a magnet under the horn and a chain around the base this tones it down nicely. (other anvils also ring and can be quieted the same way)

The anvil was shipped well, and the anvil is exactly what was advertised and expected. Overall, a good product for the price and would recommend Vevor.

It’s small and heavy just like you like. I’ve already restored and repaired so many things. Absolutely perfect if you would like the option to move it around or take it somewhere to work.

Pretty much exactly what I expectedCan���t wait to use it

I use it for jewelry making.

Nice solid anvil, get rid of the blue paint and you have an indestructable part of your shop with years of enjoyment!

Should give me alot of years of service,thanks vevor for giving good products at great prices with exceptional customer service.

It's a steel anvil. I don't know what else to say here. Rings like a bell. File doesn't bite. Weight is accurate. I'm happy. I just long the days where you could get a 70 lb steel anvil for 70 dollars but it's hard to find that anymore unless you know of a good garage sale. This is what we call the low hassle premium.