Customer Reviews for VEVOR Boat Cover, 14'-16' Trailerable Waterproof Boat Cover, 600D Marine Grade PU Oxford, with Motor Cover and Buckle Straps, for V-Hull, Tri-Hull, Fish Ski Boat, Runabout, Bass Boat, Grey

especially for the price

This is a really good cover for the price. Seems to be well manufactured. I would definitely purchase this cover again.

This cover is heavy duty and extremely waterproof. The elastic band is almost strong enough to hold the cover on by itself. They come with plenty of straps and length on them to tie it down.

I got this cover to go on a 23 ft sailboat (with the mast down & off to the side, of course), mainly just to keep the rain out while it's sitting. Got tired of replacing standard tarps that didn't do all that good of a job, and fall apart all too easily. This one covers the boat from stern to part way out the bowsprit, so it does the full 23-24 ft. advertised. The hem is stretchy, so it wraps around the boat. The multiple tie-down loops and long straps make it easy to secure to the trailer, and remove when necessary, and the straps also have quick-release buckles. So far, it has done a pretty good job of keeping off water, and if it lasts a few years it will pay for itself over buying multiple woven tarps. To extend the life of the cover, I do suggest padding any edges on the boat that aren't fairly smooth, even if they're not actually \"sharp\". I get cheap pool noodles from the dollar store, cut them as needed, and duct-tape them around any such edges.

Here's my problem: I have a vintage wooden runabout that's about 17' long, not including outboard. I've been using a cover (different brand) listed for boats 17-19' long, 90\" wide. I don't even have the windshield reinstalled on this boat since I've been restoring it, and the other cover barely came down 4-6\" over the gunwales in places. If the cover had to reach over the windshield, there's no way it would provide ample protection. The cover also could never extend over the outboard, so some rain would always get in at the mahogany transom. My solution was to get the next size up in a cover that's also made for a wider boat, thinking that this would just be able to get past the gunwale once I reinstall the windshield. I ordered this Vevor cover in the 20-22' size, listed as suitable for boats up to 105\" wide. If everything were proportioned like my old one, that would still only accommodate about 8\" of windshield height compared to the old one, but I decided to give it a try. I've only gotten one other Vevor product in the past, I believe -- a set of boat guide poles for the trailer, and I was pleased with those. Similarly, I'm very pleased with the quality of this boat cover -- and, as my headline says, the sizing is very generous compared to my other one. I use about 4 cover support poles, and there was so much cloth on this one that I had to extend the poles to their fullest height to accommodate the material. Of course, this provides the best drainage as well. Even so, the sides of the cover come down almost all the way to the trailer frame. There's plenty of slack at the bow. At the stern, the entire 90hp outboard is covered, with plenty of material to spare. I can rest assured that, once I do reinstall the windshield, this cover will still be able to cover everything that I need it to. Had I known that Vevor actually sizes their covers as I would expect (unlike my old one), I probably would have gotten one size down. Still, I'm not using this for traileri

I need to replace my boat cover and I decided to try this one. It's got a nice heavy duty material, listed at 600D. Because it's a little bit more heavy duty than the one I had before it was a little bit harder to get onto the boat and position just right by myself. The included straps were fine and securing it to the trailer and it does come with a little carrying bag but I don't think I'm going to really need that as the cover stays on all the time. Because this is a universal cover and not form fitted to the boat, there are parts of the stuff a little bit more loose. I'm using cover rods that prop the cover up so that I don't get sagged and water buildup. I do hope that this lasts a very good amount of time.

We have a 19' long bass fishing boat, and this cover stretched back even far enough to cover the motors! I really like that it's a light color - so many are dark and soon look faded and old, but this one should look good, longer. This also has UV protection, which should help its longevity. It was fairly easy to stretch over the boat, and the elastic around the edge helps keep it in place while and after you do. Because it's a generic cover, of necessity it doesn't have any of the reinforcements that might be nice, but you can work around those by employing the use of things like foam swimming noodles over the top windshield or any other sharp edges. The fabric seems sturdy enough as well. This cover also has sewn-in strap loops to which any of the twelve tie down straps fasten it to the boat trailer via the buckles on each end. Really decent boat cover for the price, for sure!

This is a nice heavy cover that looks very well made. Fit our 23’ ski boat nicely. Time will tell how long it lasts. For now I would recommend.

This is an okay boat cover for the price. It covers my our 14ft boat including the engine. The overall stitching is good. The stitching on the tie down loops seems okay but I feel if the tie down straps were too tight adding additional weight from water on the cover it could possibly tear the straps off or rip the cover. This may not happen time will tell.

Fast delivery. Fits right. Looks and feels well made.