Customer Reviews for VEVOR Driveway Lights Solar Driveway Lights Die Casting Aluminum w/12 pcs White

I have previously used these lights for a floating dock installation. Still working after two years in continuous use. This purchase is for a new dock and are exactly as described and an improvement over purchase previously. Easy to install using an 8mm drill bit and enclosed hardware. Although these were more expensive than previous purchase, isn't everything these days?

These are very solid led lights. They are well made and easy to install. We used them to light up our pier.

Look and work perfectly!

We lined our boat slip with them! Provides the perfect amount of light!

I uses these to light the perimeter of our deck and the steps, nice and bright but not overwhelming. The battery lasts 6-7 hours on most days. Definitely purchase again.

Very attractive as markers for my driveway.Easy to install and got plenty compliments.

I love these lights! I wish I had a picture to show you of my driveway at night - brightly lit for 80 feet. And they last all night long. Only a few (shortest) days in December did they not last through the night or when we had really dark cloud cover all day. (Even so they lasted well past midnight.) I would buy these again in a heartbeat I am so pleased. CAUTION: These are BRIGHT! Be careful how you place them so as not to annoy any neighbors around you.I have had them in about 6 months and none have failed (but even if one does fail, I would still get them again.) JCG

I first saw these style of lights when I went to visit my parents and they asked me to install then on the top of fence posts at the entrance of their driveway. It took about 5 mins to install the two using exterior deck screws and they have been working great since. Well, I decided I would buy some of my own but my driveway entryway is concrete and the anchors that came with the lights are 8mm and would need a 14mm bit to drill a good sized hole to install them, plus I didn't have a 14mm bit lying around. I instead went to the store and got some 1/4" tapcons and some 1/4" anchor bolts instead. I first tried the anchor bolts as I figured they would give a nicer look, but didn't realize until after I had the bolts in the concrete that the nuts would not fit. I then resorted to tapcons, but was not too successful on the first hole because I didn't clean the concrete dust out of the hole well enough and didn't run the bit up and down the hole enough times to insure the tapcon would go in well and it snapped off when using the impact. I had to cut off the tapcon level with the concrete and try again, but this time made sure the dust was cleaned out and had run the bit up and down about 10 or so times. After that I got the Tapcons to go in fine and the lights are secure. What I thought would take 15 mins or so actually took about an hour, but hopefully my trial and error will help you out. Also, there are no installation instructions other than making sure you turn on the light and test them before you install them.

These blue ones are bright!!!

Work great on the face of a concrete walkway step. Just make sure to install them where they will get plenty of direct sunlight.