Customer Reviews for VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

Works great

Worth the money

IT broke after 6 months, and vevor will not help me after multiple attempts. Stay away fro m all things from this company if you want 0 support.

For the cost this machine is great. We bought it for a job that had several complex bends with #4 bar and required #7 and #8 bar as well. The machine cut the #7 bar great. The #8 bar was difficult to get into the cutters and we ended up breaking a set of cutting blades. Make sure when you order the machine you order extra cutting blades. The bending worked well, but the degrees settings were slightly off. Plan on having to figure out what degree differences it is before you really start using the machine. After a damp day there was a little flash rusting on some of the parts but nothing serious and it could just be wiped off. The multiple foot controllers is a nice feature so you can have two different angles programed at once. The instruction guide is not very informative but is important to read for what it does tell. For example, that you need to warm up the machine before use. Overall, for the price it is a great machine.

Works as expected, seems to have enough power to bend #6 grade 60 rebar and cuts it well. The degree setting for the two bend angles is off by several degrees (8°) but was able to compensate to allow for the inaccurate degree settings. The owners manual is very vague and has no instructions on adjusting the degree angle settings. Also the #1 setting and #2 settings both bend to the same angle regardless of what you have the degree settings set to. Since what I am doing now the same angles for each bend so it hasn’t been a big issue. But compared to other units it is worth the price.