Customer Reviews for VEVOR Hydraulic Pump, 4 Quart Hydraulic Power Unit, Single Acting Dump Trailer Pump, 0.91 GPM Flow Rate, 3200 PSI Max Relief Pressure, DC 12V Hydraulic Pump for Dump Trailer Car Lifting

The price is great but only if it works properly!! Out of the box it didn't work. I called tech support who kept telling me to connect the positive to the negative, in my line of work thats called welding. My customer was furious so I had to open up the electric motor and found the brushes were hooked up inside, basically stuck up to high to touch the commutator. I fixed a brand new motor and lost lots of money messing around with it. The quality is good, I guess a manufacturing defect. To really slap me in the face they refunded me like $13, I just laughed and went about my day!!! I have ordered several things from vevor and this is my first hiccup.

We have purchased this product multiple times because of its price. The quality of the product is questionable. We have failure with every third one. It is very bad with customers, they keep bringing them back.

Works great and im happy with it. Will buy again if needed. Vevor products have been working good for me.

Bought it for a dump trailer I’m building. Great size and works great would highly recommend. Just make sure you choose the right size when ordering.

pump worjs perfect first time. i needed to but 90 degree jic/bp thread fittings but other than that it a great deal

We put this on our 14K trailer power up and down works amazing. It was a gravity tilt and it was simple with all the fittings that came with to swap it out to power running it off of a couple deep cycle batteries everything we loaded onto it so far it's been able to push up and pull down

It possesses above-average quality and functions exceptionally well. Initially, installing it was a bit challenging for me, but after watching several videos and reading the manual, I successfully installed it. I've been using it for over 3 months now, and it operates smoothly without any issues. Overall, the quality is outstanding and quite acceptable considering the price.

Nice machine .. what I like about this unit is the 20 quart capacity .. some applications need the extra swing difference

This power unit works great for running a small hydraulic cylinder. I am using it for a cultivator lift for my tractor. It provides good pressure and volume. The electrical connections are easy to make. I really like the magnets attached to the control box to hold it against any iron surface. I had an issue with the fitting on one side. It comes with a large hose fitting installed in the vale body and a set of JIC fittings that can be swapped out. When I installed the JIC fitting on one side it fir perfectly. The fitting on the other side would not tighten down properly (photo 6). The larger fittings that came installed are a 1/8 inch shorter than the JIC fittings (photo 5). The problem is there is a restrictor installed in the one port on the valve body (photo 7) which causes the longer fitting to bottom out before the O-ring gets tight against the shoulder. I used my lathe to remove some of the length from the fitting (photo 8) and I was able to get it properly seated and tight. Now the unit works well and lifts the cultivator on my tractor. This is a good unit and the price is reasonable.

Vevor makes some solid equipment. We’ve had other Vevor products and tools and most all the time they’ve been good products. This Hydraulic pump is a powerful pump and moves fluid pretty quickly. It has a large fluid tank to push quite a lot of fluid to the hydraulic lifts. You can tell the motor is a pretty heavy-duty motor by the weight. Its definitely, worth the money so far.