Customer Reviews for VEVOR Hydraulic Shop Press, 12 Ton H-Frame Hydraulic Garage/Shop Floor Press, Adjustable Shop Press with Press Plates, Heavy Duty Hydraulic Press for Garage, Shop, Workshop

Not as heavy duty as I'd like, but will press my light duty stuff. Would be afraid to do anything larger on it.

The Jack has a tendency go off center when under a load. I clamped 2 angle iron on the front and back to eliminate the problem. The Jack Handle that is used to lock and unlock the Jack, is not the best.

Shop press was easy to assemble and worked like a charm. Need to add some stability on bottom of the bottle jack to prevent it from turning though. Thanks Vevor.

Only used once to press out con rod pins, did the job very well. Seems to be really good quality for the low price it is, press plates will probably bend under its force however and the bottle jack is not secured at all but other than that very good

Having experience as a car and semi mechanic, I was reasonably sure I could do my own press work on my lower unit. I bought an inexpensive adjustable worktable/vise, which so far has held up great. Thanks Menards . So in order to do the driveshaft bearing I wanted something smaller and lighter, so I purchased this press. Works great hasn't broken a sweat. Light enough to pickup and set on worktable or floor. Love it.

Everything went smoothly, got it pretty fast. I will be doing more business in the future. Thank you.

Well made press, no problem breaking loose my mower deck bearing that had been in service for nearly 50 years. Only complaint is that handle doesn't align well in relief valve, it's too big so you have to take care/time to align it exactly otherwise it slips.

If you have alot of work to do and small space this is a great size and value for the money. I use it on the daily and it works great!

I purchased this press to install wheel bearings. I have tried in the past without a press and ended up paying someone to do it. This press though small is perfect for that job I would recommend it for small jobs. For the price, you will be pleased, Realize it is a small press, don’t think it would do much more than wheel bearings or u-joints.

Worked great, easy to setup, used to press pins on the piston into the rods of a Jeep 4.0L. made it really easy to do a piston swap on a rebuild