Customer Reviews for VEVOR Hydroponics Growing System 36 Sites 4-Layer Hydroponic Grow Kit PVC Pipes

Easy setup. Looks exactly like picture. Will need a little Teflon tape for small leaks at joints

There are a lot of sites for your herbs and vegetables. but they are too close together. I was alternating lettuce with green onions to provide space. The pump takes 7 watts of power and it does circulate the water. I placed mine inside the house under a southern facing window to get all day exposure. I bought a 10 gal tote from Home Depot and cut 2 holes in the top for the output line and return line. The assembly was easy. Be careful when putting the connectors together as they may go in too far. I tested this outside over night. It had a few leaks. I ended up using pvc purple and cement. One of the tubes was cracked and I used the cement to seal it up. Lastly, the sizes of the PVC is non-american standard. You can't get replacement parts from Home Depot, Lowes, etc. But it is functional and I will use this and the other one as a model to build a large one using local PVC parts.

Instructions were not in English but photos were adequate. When assembled, product was stable and sturdy. I’m excited to try greens and strawberries in the very near future.

no complaints really. i changed out the compression type hookup for a diff one because it leaked a bit where the hose was fastened. other than that a cheap plastic tub with holes cut in the lid suffices for a tank. 1000w lights cover it perfectly. ill prob get a better pump at some point as i don't expect the little thing included to last long. it is working fine so far a month in though.

Great product. No leaks but the sponges that come with it need improving

This was purchased as a mother's day gift so I had to wait and see. But she loved it! Said it was easy to assemble and she's excited to see it work!

I've purchased a few of these (in different configurations), and they all go together easily, and they don't leak. They work well for smaller plants, particularly smaller lettuce and herbs. I haven't used it indoors, but given it's size and the fact that it doesn't leak, I think it would work well. The pump is small, but seems to get the job done.I threw the planting sponges away as soon as I opened the box and used 1" rockwool to start the plants.Be aware, the size of the PVC is not the same as PVC in the U.S. You cannot simply go buy replacement parts. However, if you've got some imagination and patience (and lots of silicone), you can make U.S. sized PVC work.I've made other hydroponics systems out of PVC. I couldn't make a similar one for the price of this one. There is also the time factor; a few minutes putting it together apposed to several hours to make one from scratch.Overall, it's worth the money.

Great value, good quality, easy to assemble, though does not come with instructions, only a photo showing the number of each item. But it is pretty self explanatory and you can put it together in about 15-20 minutes. Once together, it is very sturdy. I like the fact that it comes with everything you need except the water reservoir, but any large plastic tub will work. The pump is just the right size to get the water up to the top without any problems.

This was pretty simple to assemble and the directions were helpful for getting started. Wish it came with a bucket for the reservoir. I had to buy one and rig up a drain line to it to have a closed system so I do ked a star for that. Otherwise it's inexpensive, simple, and it works.

Today received the box containing all the parts, the kit includes the pump, the timer controller, the power supply, the plastic hose, the net pots and the foam blocks. You only need seeds, water and nutrients. Assembly was very straightforward, the drawing was easy to follow and there were no broken or missing parts. Since the system sits a little low and I wanted to use a large water reservoir I had already planned to raise the PVC table. All the tubes are metric and it is not possible to find metric parts in North America, I had to improvise a little and use pipes to either go outside or inside of the original pipes. It was not difficult and the project was finished on the same day. The system is already running, there are no leaks or overflows, so far I am very happy. I will try to take some pictures. Similar systems are sold by varios sellers on Amazon, this one was the least expensive, I consider it a Best Buy.