Customer Reviews for VEVOR Linear Guide Rail Set, SBR16 1000mm, 2 PCS 39.4 in/1000 mm SBR16 Guide Rails and 4 PCS SBR16UU Slide Blocks, Linear Rails and Bearings Kit for Automated Machines DIY Project CNC Router Machines

I needed to make a jig for using a router to mill large slabs flat on both sides. The slabs are too large for a planner or a drum sander. If the slab was not close to square, a belt sander would not be able to cut enough off. So instead of spending $1000 for a jig, I am building one with the help of these Linear Rails with the ball bearing slides. I actually bought 2 sets of the rails, 1 set is 60 inches and the this set (40 inches). The longer rails will be mounted on a side that is parralell to the slab on each side for the jig to rest on and be able to move it from one end to the other and the shorter rails will attach to the bearings of the longer rails an the router will sit on a platform attached to the bearings of the shorter rail. This allows for the router to be moved easily across the slab and from one end to the other and hold the router flattening bit at the same level.

I noticed the blocks are not quite as smooth as I had hoped, but they do the job quite nicely. I used only one of the rails so far. I had to cut it to fit my cheap 3d printer. I replaced the flimsy 8mm tray rails with something a bit more substantial and much more robust. The carriage is much more sturdy now and auto-leveling the machine is much easier since the bed doesnt wiggle any more. It may have been a bit overkill, but thats my style.

Very satisfied with the quality and price....would definitely buy with them again.....especially like the fact that after receiving items, the seller emailed me asking if items were delivered and was I happy with them.....GREAT job!!!!

Not the best linear rails, but with some adjustment, they turned out to be very good. A little noisy, but perfect for my applications.

They are a nice set of rails but they do not come with pre-drilled holes for mounting.

These linear rails came well packed and shipping was fast. They appear well made and heavy duty. These are the second set I have gotten and would buy them again. The surface hardening is really tough. If they must be cut forget the hacksaw they need to be cut with an abrasive wheel. A dremmel will do the job. It took 2 discs to get through it.

i bought them to use as part of a break down router sled, they work great!

Rails are very sturdy and well built.

Sturdy assembly, no bend or sway... Performed as advertised.

highly exceeded my expectations for price point. Excellent quality!