Customer Reviews for VEVOR Server Rack, 12U Open Frame Rack, 4-Post IT Server Network Relay Rack, 19 Inch Server/Audio Network Equipment Rack Cold Rolled Steel, Heavy Duty Rack w/Casters, Holds Network Servers & AV Gear

Great choice for a small homelab, very well built. But the rack hardware nuts could have been better.

The frame is solidly built. Corner stiffeners work quite well to stabilize it. Adjusted mine to 32” depth, so top cover (not adjustable:-) doesn’t cover all, but a piece of plywood on top would fix that that. Only problem is the wheel attach. It looks like it’s a spot-welded nut. I’ve only loaded to 80lbs and one has already broken loose. When done, load will be close to 180lbs (it’s rating) so I will have to reinforce somehow. Update: Three wheel attach nuts have failed. Not even fully loaded. It looks like they punched out a hex hole for the nut to sit in then spot welded it! If it were a full weld, it might have worked, but just a round clearance hole with the nut spot welded on surface would have been stronger (would have frame support stress rather than spot welds). Now I have to use two large pattern washers to compensate for the hex hole.

Great piece of equipment, it did not disappoint, the metal uses good quality. The only complaint is it is a little hard to put together and also a little hard to figure out how long to make it. But once your past that its great, I have two servers and a dream machine pro on it with no issues. This could also be used for sound equipment which would be nice since it comes with wheels to move it around easier. Overall great product!

Its not a bad little rack for the price point - my only observation is that metal is a tad thinner than I prefer for hanging a rackmount case in it - fells like its going to kink something (if you know what i mean?). I went with some aftermarket shelf-rails for my little project - its ok not bad really.

Really nice rack. I have three 2U servers and it does a great job without taking up tons of space. Very solid and the wheels make it helpful to move it when I need to get to the back. Price was the best part.

Very heavy duty and good quality unit. A little involved to assemble, but it is worth the time and effort. I bought the 15 unit rack after buying this 12 unit one.

Excellent product that now contains a 1U ethernet switch, 1U power bar, KVM, and several component shelves. Easy to assemble with a power screwdriver. Just make sure the clutch is set properly so you don't overpower and strip the screws.

500% better then any other found unit. Very strong, both sides usable, neatly marked parts for assembly. OUTSTANDING… Tom

Took about an hour to put together. Other reviews have a lot of great information one thing I will say is I highly recommend having an impact driver, a drill would work but the screws can be fairly difficult to drive. For the price this is a great rack, very sturdy. Just make sure to pay attention to the manual and note the pictures.

I use this Rack for my home lab/media server. In this rack I have a 4U server case with 15 3.5" HDD, 1U surge protector, a Blonder Tongue Audio/Video modulator, network switch, and KVM. It is sturdy, and rolls well even over carpet. Nobody else is offering something as nice at this price point. Vevor is my go to place to buy White label products.