Customer Reviews for VEVOR Pallet Forks, 4000 lbs Clamp on Pallet Forks, 60" Total Length Heavy Duty Pallet Forks with Adjustable Stabilizer Bar, Tractor Bucket Forks for Tractor Attachments, Skid Steer, Loader Bucket

bought these in lieu of yet another full attachment to store - picked up some LVP flooring with it (very heavy) and had to split into 2 pallets because was going to bend the bucket on my 25hp tractor ... the tractor could handle the weight, the forks DEF handled the weight but the bucket was about to deflect (perm. bend!) but it was bulging and came back when I took the weight off - so no damage to my bucket but these forks are tough! No bend at all on them but the way they attach works but not awesome ... but it does work. If you have a monster tractor bucket it would probably b fine but they are tough (the forks) to keep in the exact right position - but likely because I only have a 25hp branson tractor. She is powerful but I am going to try tile next (2200 lb pallets) and I am sure I will be splitting them. The forks were also used to move a 2yd (small) dumpster and that worked like a charm but pulling the forks out after I dropped it was an issue as they came right off of the bucket (probably because I have a smaller bucket) so that was not kewl but again I just got off and pulled them right out by hand, put them back on the bucket and back to work! These are tough but can roll left and right if you are turning and bump something and could result in loss of the load if not super dooper careful. But still - better than having another whole attachment to store. If I had it to do over - id' buy them again in lieu of buying another attachment to store. But I dont use them as a 'primary' implement. As far as what they hold - NO bending or anything even on the part on the bucket with a load so heavy (2200lb) that my bucket was deflecting!

pretty good product overall -josh

Easy to use and well made forks. Sturdy product . Brace in the middle does a good job keeping them sturdy.

Product arrives quickly and is very easy to use

work great

Poor welding on set screw for cross member

Loved it! Used them to pick up 4ft by 4ft pieces of concrete!

The parts where the uprights are need to be thicker, they bend easily. Other than that they are great!

These Forks Work Great For My John Deere 740 Tractor. Clamb Down Screws Are A Little Short But This Issue Is Easily Rectified.

These are pretty heavy duty for a small tractor. I am using these in a JD 1025R. Work great for what I needed. Just moving skids of firewood, some small tree stumps to the burn pit, and some skids of retaining wall block. Now you cannot over load the skids. The tractor will max out and not lift them. If you just want to move around things like that they worked great. Due to the limits of the tractor I will not bend or damage these forks. Only thing I would change is to have a bigger foot on the bottom of the tightening screw. I do not use the support piece for between the skids due to the keeping the skid further away from the bucket limiting the amount I can lift. Without it the forks do move and sometimes I have to readjust. But not that big of a deal.