Customer Reviews for VEVOR Pallet Forks, 2000 lbs Tractor Bucket Forks, 60" Total Length Clamp on Pallet Forks with Adjustable Stabilizer bar, Heavy Duty Pallet Forks for Tractor Attachments, Skid Steer, Loader Bucket

I don't really have a great need for a fork lift - but now and again it would be helpful. These are the perfect soution added to my front loader. Reasonably easy to attached. Brace bar is essential. I have only moved tree trunks and a couple large deliveries on pallets. I purchase chains to attach more securely but have not used. With more heavy use chains would be nessacary for me since they do tend to shift a bit. But not worth effect to use chains for small task.

I've had these for almost a year and use them regularly on my john deere 5103. They are holding up well and have paid for themselves many times over.

Purchased these for our tractor. Easy to use as they just clamp on the bucket of the tractor. Used first time to unload a 250Lb pallet off of truck and they worked as expected. I did not get the additional stabilizer bar, but it would probably be a good addition to the forks. I am happy with the purchase and VEVOR service.

These arms are made very well, and really help me out alot on lifting up large items.

Great investment, protects what ever you don't want hot sparks or hot steel dripping on, completely protects anything your welding or cutting on, highly recommend.

Work great wish I had ordered the longer ones we put them on the bucket of the Kabota tractor but you can’t see them from the seat so if you go to get a set, do yourself a favor and buy the longer ones and get the center support brace it’s a must have.

Great item and seller

The clamp on forks are adequate, definitely need to secure to the bucket with the slots for chains,for more stability because the clamp downs loosen with each lift.

I bought these until I can afford a proper set of forks to attach to my tractor bucket. So far so good. I would recommend these for lighter loads for sure.

Bought these for odd jobs here at the farm. When they arrived, FedEx wasn't gentile with the box. It was torn but not too bad. Thankfully, all of the pieces were there. I was surprised to see the quality of steel and the welds. They will last me a lifetime as long as I don't get too zealous with lifting things up. My tractor a Long 2460 that will lift about 2600# with the bucket. These should hold up nicely. I would want the forks to bend before the bucket lip. The powder coating is nice as well. My only complaint is with the hold down mechanism. The bar used to tighten the forks down with is too short as you really need a short cheater bar to get them nice and snug on the bucket lip. They need to be taller to clear the top of the fork bracket when you use the cheater bar. The part of the tightening bar is threaded and has a nut to create the pressure. The nut is held on the tightening gar by red loctite. After a few times, the loctite broke free. The nut does not stay on the bar anymore. I am going to drill a hole through the nut onto the threaded bar. Then put a pin through both to keep the nut from turning freely. Other than these few things, these forks rock. I tell everybody about these.