Customer Reviews for VEVOR Pipe Stand, 2500LBS Heavy Duty Pipe Jack Stands, 27.2"-52" Height Adjustable V Head Pipe Stand, 45# Steel Folding Jack Stand for 1/2-12 inches Pipes

Well constructed, heavy duty. Only flaw I've encountered is the placement of the lock down bolt for the threaded shaft. When dialing in the stand to height, the bolt is in the way of the adjustment handle when trying to lock it in place. Thinking that lock down bolt should be about an inch lower.

I use these to build feed augers. They are 23 feet long and 1400 lbs. These work amazingly well to be able to roll them to weld.

Received with bent locking bolts, roller marred up and mismatched paint. For my purposes it will work but still a little disappointing.

I had an old Sears roller stand which didn't have enough weight to stop falling over. I borrowed a friend's Harbor Freight roller stand, and it also tended to lean over when boards were rolled across the stand. The Vevor stand is heavy and sturdy and appears to have roller bearings which make boards easily glide over the stand. Once set it stays put which allows me to saw many boards without the need for adjusting the stand. It's a bit more expensive but worth it! I recommend this product.

needs to have a jam nut or system to lock rollers in place.

The best I've ever had

Nice stands. I use them in my hobby wood working shop. Retired my other older roller stands to backup status only. Wish the Vevor stand had a set screw to keep the roller part from turning side to side. There is a hole in the jack where I intend on welding a nut to, so that I can add a set screw to clamp down on the roller lead screw. PLENTY heavy enough stands for my wood working needs.