Customer Reviews for VEVOR Ratchet Pipe Threader Kit, 1/2" NPT, 3/4" NPT, 1" NPT Manual Ratcheting Pipe Threader, Portable Pipe Threading Tool Set with 3PCS NPT Dies, Storage Case for Galvanized Aluminum Iron Copper Pipes

I wanted some large clamps, and I decided to make some pipe clamps out of 3/4” pipe. I have never threaded pipes before and I didn’t really want to pay for the Ridgid set as i don’t need a pipe threader for anything else. Overall, I am happy with the result. The threading was pretty easy (used plenty of oil and backed of the threading every couple of turns to clear the shavings). The threads are well defined if not super clean. However, they mated with the Bessy pipe clamp ends that I bought just fine for a solid wobble free fit. I only did 4 pipes so far, but It doesn’t look like the cutting blades were damaged. The last pipe cut as well as the first. Knocking off 1 star because there is a lot of play in the ratcheting system. So if you don’t have a bunch of clearance it takes an absurd number of strokes before the pipe is cut.

Threads are a bit deep but it's good for the price. Pic is a nipple beside the cut threads.

Great product. Works great. A great price.

Vevor makes solid stuff. It's simple, has some basic casting pitting and the like, but none of that matters to the form and function. Did an awesome job on some black pipe and galvanized pipe to enable me to create my own pipe clamps of various length. Great tool for the money!

These threaders work very well. I would highly recommend them. For reference, they will not thread a quarter inch bar. It Hass to be the right size.

quality too set in easy carry case

Looks to be of very good quality. Looking forward to using it. The kit has all of the sizes I need.xck;nva/ldkngc vg a;lir vgh;xdklh ga;lkdth qe;lRTJ G

Works very well!

USE PLENTY OF CUTTING FLUID AND TAKE YOUR TIME! I can't stress that enough. You can catch and filter your cutting fluid and recirculate it so you aren't going through so much of it, if you take your time and don't force it and use plenty of cutting fluid it works. I used this for running black iron LPG piping. Used gas approved Teflon tape and also gas approved pipe dope and not had any leaks. Threads were smooth without any issues. Two turns in and two turns back then continue forward again. It's not like the commercial thread cutters so do understand that this is for lighter use but it does work and it works well and like everything else keep it clean and maintained!

Worked really great for my job