Customer Reviews for VEVOR Sauna Heater, 6KW 220V Electric Sauna Stove, Steam Bath Sauna Heater with Built-In Controls, 3h Timer and Adjustable Temp for Max. 176-318 Cubic Feet, Home Hotel Spa Shower Use, FCC Certification

My sauna is 3' x 5' with 7' ceiling and this heats it up to 180F in about 15 minutes. The control makes a pretty noticeable clunk as it connects and disconnects current as directed by the thermostat but that is a lot of watts to be switching. Think the swing switch in Frankenstein :-) I added rocks I bought at Menards but you need to be careful. Some will shatter when heated. They sell the right rocks for saunas elsewhere, I was just being cheap

Works well. A little noisy.

I used 9 AWG wire for hot and ground wires. I had a 40 amp circuit breaker but it kept popping so I went with a 60 AMP circuit breaker and it works great! Instructions are simple and easy.

Take note of the listed room size ratings, I bought the 9kw for a 4x4x6 sauna, might be overkill

Perhaps my 4x4 sauna is too big or not well insulated for the 3kw, but it couldn't heat it up enough

We bought it in February 2024 and one heating element in 3 just burned. Use approximately 1x per week. Otherwise we were very happy so far with our purchase. UPDATE: We contacted VEVOR and they sent us a new heating element rapidly. All the service support were fantastic. Thanks again.

The wires that hook to the elements keep melting of has happened twice in two weeks had the stove one month

Not plug and play. I used stranded 10 gauge wire(black, white, ground) on a 30 amp breaker (with a 30 amp disconnect in the middle) to get the 4.5KW heater working. My sauna is about 190CUFT and it gets to an easy 180 degrees Fahrenheit (ceiling level) after about 40 minutes.

one year in and still working great!

Sauna gets up to 210, maybe higher if I let it. For the price, can’t beat it.