Customer Reviews for VEVOR Shelf Bracket, 12”L x 4”W x 1.6”H 6 Pcs, Heavy Duty Floating Shelf Brackets, Brackets for Shelves, 5mm Thick Matte Black L Shelf Bracket,Steel Shelving Brackets with 160 lbs Load Capacity

These brackets are as advertised. They work well. The supplied screws, while they would be great if used with the accompanying drywall anchors, tend to break when screwing straight in to old studs. Otherwise the set was a great value!

Very heavy duty bracket. Has correct hole size for supporting larger load and holes are positioned to be able to get the bolt into position.

These worked great for doing my own shelves with my own materials. They are pretty heavy and thick, so consider that in weight considerations when mounting. I was a little nervous to use dry wall anchors with these, but I did use them. I mounted a shelf to store kitchen appliances like toasters, pressure cookers, pots, etc. They have held up amazing and so far, after a few months, there is no sign of any give or problems.

The brackets provided the proper support for a 8 foot shelf. These brackets offered a view of a floating shelf of blended white color. Very pleased with the ease of installation and the end result of the appealing look of the finished product. Will be purchasing these brackets again for future projects.

The dry wall anchors are easy to break as others pointed out, but they are usable. The key is to drill a large enough hole, and use manual screwdriver to screw the drywall anchor slowly. Another difficulty is to drill accurate holes make the bracket balance. The effective way I did is to first hold the bracket against the wall and make it balanced, then use the largest size drill bit that can pass through the screw hole to manually drill a shallow hole, purpose is to locate the center of the screw hole, then remove the bracket and drill the hole use the same drill bit, note to hole the drill perpendicular to the wall. The use the larger drill bit to drill the hole, finally screw in the dry wall anchor. Finally install the bracket with 4 screws. I use manual screwdriver. That's it.

Not quite as heavy as the ones from menards but about half the price. I built a shelf out of 2by4 that was 20 inches wide and screwed it to the brackets. Brackets were installed on every other stud. So every 36 inches. I am storing 2 1/2 gallon to 5 gallon oil containers, 2 1/2 gallon jugs of def, tools, you name it. In a 20 foot section of shelving I would guess around 2000 pounds of stuff. Works great. I have a new bobcat right underneath. I did use 2, 3 by 1/4 lag bolts to secure each bracket.

I was building a fireplace mantle and did not want the bracing to show. These worked perfect and it is very sturdy.

Came with anchors and screws.

Was amazed at the quality of these shelve braces. The are extremely heavy duty and at a excellent price.

Good quality, heavy duty, shipped and arrived quickly. I might buy another set