Charger looks good and has nice display. Fan is quiet. Battery clamps are cheap. Operating temperature is good, max settings getting charger warm but not hot. Displayed voltage is about 0.75V lower when tested with Fluke meter. Displayed current is about 1A lower when tested with Fluke meter. In all settings ( 5A, 10A, 20A) real charge current is about 25% lower when tested with Fluke meter. So, if you need charge current minimum 20A you will need to buy this charger 35A version. I think with 35A version max charge current should be around 25A. So far, I only tested this 20A charger with100AH LiFePo4 battery.