Customer Reviews for VEVOR Steel Landscape Edging, 10-pack Steel Garden Edging Borders, 39.6" L x 2" H Strips, Hammer-in Edging Border, Bendable Metal Landscape Edging for Yard, Garden, 2.5" Spike Height, Rustic Brown

This gets 5 stars because it is what it claims to be and seems good quality but if I were grading based on suitability for landscaping overall I’d rate it much lower because it is so short that curves are very, very difficult to do in a way that looks nice and even straight lines require extra fussing. Take a look at the curves in the description for this product and you’ll see what I mean. What I do like: - the option for 8” vs 6” tall; - short pieces are very easy to handle; - to soon to really judge durability but the coating looks great and assuming they really are powder coating over galvanized steel they should hold up though whatever you do DON’T use metal hammer to whack them into the ground like the photo shows as it will bugger up the coatings! - in my case I have a border descending a rounded bit of hill and the short pieces make it easy to follow the rounded vertical contour of the hill. I saw a review claiming the metal so thin the edges cut their dog’s feet. From what I received that claim doesn’t seem plausible however if it is a concern you can buy (or make) plastic strips for the top or pay a lot more for edging that has a folded top. I bought a second pack to finish out a straight 32’ section that needs the 8” height but given the extra work needed for curves I’ll probably look elsewhere for my next project.

This product is awesome. Installation is easy if the ground is soft, if not soak or use a trenching shovel to break the roots/ground before installation. It bends well, the clips make a clean transition. Its held up well so far to the trimmer and accidental bumps of the mowing deck.

I haven't used edge right, or even seen it, but I can't imagine it be twice as good as vevor. installation is easiest the day after a rain, but if you can't do that, just use the hose to soak the ground for a minute, and it should go right in. Videos show placing a 2x4 or 4x4 on the edging and then hitting it with a mallet. We found it easier to just hit it with the 4x4. We installed 8 boxes and eventually broke through 2 4x4 pieces and had to get 2 more (they were about 18-20" long). Bending is easiest between points, and if you clamp a 2x4 scrap to each side where you want to bend, it becomes easier. Also, if you're installing in a place that has already had woodchips down, we used the teeth like a saw at first and ran it back and forth over where we wanted it. this uprooted some grass and also pulled up any woodchips that may have caused us grief.

I purchased this edging to set a hard edge between the lawn and planting bed. The edging installs easily and looks great. I will be buying more for another bed. Installation recommendation although these sections have pointed teeth I had to use a half round edging tool to cut the slot for the edging yes it took more effort but made Installation faster over all as driving through roots and hard soil is not easy. The one criticism is the edging has no means to interconnect the panels, the stakes are great for the seams but some more solid method to lock the sections together would be great. I am planning on using black stainless bolts to bond the sections together

Good quality and nice clean look. Difficult to install alone or near tree and established shrub roots

great product difficult to install but works well. metal holds up to pounding in with rubber mallet and block of wood

We used this steel landscape edging in our front yard. Very nice quality and construction. It was easy to install and it looks great! We had to make a couple of little adaptations to work with the yard situation we were dealing with, but the edging was easy to work with. We are so very pleased with the result and I am so glad that we found the Vevor website!!!!! The rock comes in a couple of days, so I will update with a photo when we are finished.

Delivered on time Installed into the ground easily, I used it to seperate a rockbed from my grass working perfectly. I was missing 10 of the connectors reported it to Vevor and they sent them immediately over all very pleased.

Compared to some higher priced items this is not as heavy but for the money it's pretty dam good.. you will go through wood to help drive this in the ground but my soil is hard/ clay. 2 people doing this helps the process and I bolted mine together rather than the clips. I think with the frost the bolted sections will help lifting of the sections. It's good stuff

Strong metal edging with teeth. But you need to dig a trench for the edging. You can not just pound it into the ground.