VEVOR Table Saw Fence System, 37"×57" Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

This fence works well, after some installation challenges. I installed on an old Craftsman saw. I noticed the comments about the heads of the mounting screws preventing the fence from sliding. That can be fixed easily. When I got mine, the front guide and the bracket to mount it were already together with 4 screws. So... First thing, loosen the screws and see if the guide will adjust away from the mounting surface that the mounting screws will go through. I found that by fooling around with that, I could get the fence to move past the screws. Second, the mounting bracket was not flat at all - that added to the clearance problem. So I took it off the front guide and straightened it out with a heavy hammer and vice. That made a world of difference. Third. Once everything was together, I could not adequately adjust the fence parallel to the blade. I tried the adjustment screws, but they only went so far. So I took the front guide off the bracket again and I slotted the holes that mount the bracket to the front guide. Once back together, I was able to adjust the fence perfectly parallel. Last thing I did - I wasn't happy with how tight the fence locked in place. So I cut a 1/16\" piece of aluminum (1\" x 1 1/2\") and epoxied it to the flap that locks against the front guide. Now it's perfect! It makes a whole new saw out of the old Craftsman. All of the minor issues were relatively easy to fix without spending any money.

We love it!!!This fence system is perfect for a craftsperson who is a dedicated problem-solver.You'll need to be well acquainted with how a multitude of disciplines are undertaken. The price is amazingly accessible and therefore, you must put the work in.You'll need to buy or machine button head 10-1.5 bolts to connect the rail to your saw table/cabinet; the hardware provided will not work for said connection.Adjustments are basic, easy and many, especially considering the price. We were able to get the margin of square/out of square to .002 of an inch.The locking is solid and the cuts favorable.We will be adding a tube steel fence extension and uhmw fence guards to complete our set up.Can't recommend enough, just remember, the quality of this fence system relies on the quality of your work.

Think of this as a kit of raw materials: it'll require additional hardware, some basic metalworking skills, and a lot of patience to install. But it's a great jumping-off point to craft an custom fence for your table saw.CONS:- You'll want to buy new measuring tape. What comes installed is only left-to-right, and doesn't allow you to place the fence to the left of the blade- The heads of the mounting bolts are too tall and the fence can't clear them.- Plan for *lots* of DIY time to make this workPROS:- Comes with a drill bit and tap for your own custom mounting- Four screws allow for fine tuning to get the fence level and square- Fence moves freely when unlocked, and is solid when lockedI wanted to use this on a Craftsman 113 with a custom table surround. It took a lot of trial-and-error to get the rail to be the correct height, and it didn't line up with any holes in my cast factory table.If you have or can buy extra hardware, metal drill bits, clamps, levels, and a good dose of patience, you should be able to get this system to work for you. Considering the next option was double the cost, I was willing to put in some "sweat equity." But if you're hoping for a system that works out of the box, I'd look elsewhere.

It’s OK to install haven’t used it yet

When I was looking to purchase a new fence for the table I am building I was unsure of whether I needed the the smaller size or the larger size one for this order fact is I could’ve use the larger size one because you do not have to have it connected on both sides I’m very pleased with the purchase although one of the screws did have a manufacturing issue and was unable to be used to hold the magnifying glass on but that was easily fixed

I agree with the other comments that the instructions are not very detailed but I was installing it in a custom application. Their instructions didn���t matter. I installed it on a Kobalt job site saw. I like the saw except for the horrible fence. The kit includes the hardware and a drill bit and tap to make it fit whatever you need. I did need to extend my table to use the full 36��� to the right. Take your time and plan the installation and there should be no problem with it.

wasnt expecting much, for $100. only reason i got it is that Amazon makes it so easy to return stuff didnt see how i could get hurt. its on a ridgid 4512 contractors saw. it is a massive improvement over factory. instructions {couple pictures} suck. if you have any common sense youll get it. ole J.B. and crew nailed this one.

I like this product but wish they had use thicker material on the attachment rails. But for this super low price you can't complain as you can not buy the materials and build a steel fence for this cost.

I had modified my tables saw station and needed a new fence. It is very well made and easy to setup. Super value for the price, it can be adjusted to slide smoothly.

Accuracy in description is important!!! This fence will only fit a 50" wide table not 57" as described.I built my custom 72" x 57" table with the intention of purchasing and installing this fence at a later date based on the measurements given in image #7.it ended up being a mistake because my table ended up being 7" too wide.Image #7 shows the measurement between the front and back rails as the distance to be 57", it does not accommodate for the 7" of the 57" lost due to the width of the front and rear guide rails.The manufacturer needs to specify the maximum width of the table the fence can span when installed which is 50".I will have to insert an 9" extension block of wood into the end of the fence rail to make this fence work as intended.